Check Your Package Contents
DGE-530T
DO NOT insert the DGE-530T into the computer's PCI
Installing the DGE-530T Drivers
A.
Insert the driver CD, which is included with the DGE-530T, into the CD-ROM of your
computer.
B.
Choose the preferred language and click on "Install Drivers". When prompted "Installation
Complete", click OK. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".
Installing the DGE-530T into the computer's PCI slot
A.
Power off your computer and disconnect the power cord.
B.
Remove the back cover of your computer. (Refer to your computer's manual if needed.)
C.
Locate an available PCI slot. PCI slots are usually white or cream coloured.
D.
Remove the back plate (the small piece of metal that covers the opening for the PCI card
on the back cover that you just removed.)
E.
Insert the DGE-530T carefully and firmly into the PCI slot.
Quick Installation Guide
Gigabit PCI Desktop Adapter
slot before installing the drivers.
Next, TURN OFF the computer and unplug
the power cord.
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DGE-530T Ethernet Adapter.
DGE-530T
CD with Manual and Drivers