hit counter script
DeWalt DCD780 Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Drill
  5. DCD780
  6. Instruction manual

DeWalt DCD780 Instruction Manual

Dcd780 20v max series cordless compact 1/2" (13 mm) drill/driver; dcd785 20v max series cordless compact 1/2" (13 mm) drill/driver/hammerdrill
Hide thumbs Also See for DCD780:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
1-800-4-D
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DCD780 20V Max* Cordless Compact 1/2" (13 mm) Drill/Driver
DCD785 20V Max* Cordless Compact 1/2" (13 mm) Drill/Driver/Hammerdrill
DCD780 Perceuse/visseuse compact sans fil de 13 mm (1/2") de 20 V max*
DCD785 Marteau perforateur/perceuse/visseuse compact sans fil de 13 mm (1/2")
de 20 V max*
Taladro/destornillado inalámbrico compacto de 13 mm (1/2") de 20 V Máx* DCD780
Taladro/destornillado/percutor inalámbrico compacto de 13 mm (1/2") de 20 V Máx* DCD785
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
WALT • www.dewalt.com
E
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DCD780

Summary of Contents for DeWalt DCD780

  • Page 1 DCD780 20V Max* Cordless Compact 1/2" (13 mm) Drill/Driver DCD785 20V Max* Cordless Compact 1/2" (13 mm) Drill/Driver/Hammerdrill DCD780 Perceuse/visseuse compact sans fil de 13 mm (1/2") de 20 V max* DCD785 Marteau perforateur/perceuse/visseuse compact sans fil de 13 mm (1/2") de 20 V max* Taladro/destornillado inalámbrico compacto de 13 mm (1/2") de 20 V Máx* DCD780...

  • Page 3: General Power Tool Safety Warnings

    1) WORK AREA SAFETY Defi nitions: Safety Guidelines a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. The definitions below describe the level of severity for each b) Do not operate power tools in explosive atmospheres, signal word.
  • Page 4 power tool while you are tired or under the influence c) Disconnect the plug from the power source and/or the of drugs, alcohol or medication. A moment of inattention battery pack from the power tool before making any while operating power tools may result in serious personal adjustments, changing accessories, or storing power injury.
  • Page 5 d) Under abusive conditions, liquid may be ejected from • Air vents often cover moving parts and should be the battery; avoid contact. If contact accidentally avoided. Loose clothes, jewelry or long hair can be caught in moving parts. occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
  • Page 6 The battery pack is not fully charged out of the carton. Before WARNING: Always wear proper personal hearing using the battery pack and charger, read the safety instructions protection that conforms to ANSI S12.6 (S3.19) during below and then follow charging procedures outlined. use.
  • Page 7 RBRC™, in cooperation with D WALT and other battery users, has contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation established programs in the United States and Canada to facilitate Hazardous Material Regulations (HMR) actually prohibit transporting the collection of spent nickel cadmium, nickel metal hydride or lithium ion batteries.
  • Page 8 • These chargers are not intended for any uses other than Minimum Gauge for Cord Sets charging D WALT rechargeable batteries. Any other uses Volts Total Length of Cord may result in risk of fire, electric shock or electrocution. in Feet (meters) •...
  • Page 9 on any other voltage. This does not apply to the vehicular DCB107, DCB112 charger. PACK CHARGING Chargers Your tool uses a D WALT charger. Be sure to read all safety PACK CHARGED instructions before using your charger. Consult the chart at the end of this manual for compatibility of chargers and battery packs.
  • Page 10 the yellow light will turn off and the charger will resume the charging 2. The charger and battery pack may become warm to the touch while charging. This is a normal condition, and does not procedure. indicate a problem. To facilitate the cooling of the battery pack LEAVING THE BATTERY PACK IN THE CHARGER after use, avoid placing the charger or battery pack in a warm The charger and battery pack can be left connected with the...
  • Page 11 FIG. 2 WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to enter the battery pack. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.
  • Page 12 To select reverse, depress the forward/reverse control button on Worklight (Fig. 2) the left side of the tool. There is a worklight (E) located just above the trigger switch (A). The center position of the control button locks the tool in the off The worklight is activated when the trigger switch is depressed, position.
  • Page 13 FIG. 3 OPERATION FIG. 4 FIG. 5 WARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Installing and Removing the Battery Pack (Fig.
  • Page 14 3. Always apply pressure in a FIG. 7 fastener at the desired depth. The lower the number, the lower straight line with the bit. Use the torque output. enough pressure to keep drill 3. Insert the desired fastener accessory into the chuck as you biting, but do not push hard would any drill bit.
  • Page 15 MAINTENANCE MAXIMUM RECOMMENDED CAPACITIES WARNING: To reduce the risk of serious personal injury, DCD780 DCD785 turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or WOOD accessories. An accidental start-up can cause injury. Auger 7/8"...
  • Page 16 This warranty does not cover part failure due to normal wear or tool 9258) for a free replacement. abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-D WALT (1-800- 433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others.

This manual is also suitable for:

Dcd785

Table of Contents

Save PDF