Page 1
Operating and Installation Instructions Built-in Coffee System To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. en – US, CA M.-Nr. 10 215 120...
Contents IMPORTANT SAFETY INSTRUCTIONS .............. 5 Preparing your appliance for an extended vacation..........15 SAVE THESE INSTRUCTIONS ................15 Guide to the appliance .................. 16 Front view ......................16 Accessories ...................... 18 Operation...................... 19 Touch display ......................19 Operating actions ....................20 Symbols in the display ..................
Page 3
Contents Resetting drinks .................... 42 User profiles...................... 43 Accessing a user profile ..................43 Creating a profile ....................43 Selecting a user profile..................43 Changing the name ....................43 Deleting a user profile.................... 43 Changing a user profile ..................44 User profiles: Creating and editing your own drinks ........
Page 4
Contents Waste unit......................62 Main dispenser ...................... 62 Sensor cover ......................65 Maintenance of the milk valve................65 Milk flask with lid ....................66 Bean container ...................... 67 Interior and machine front ..................68 Main dispenser connector..................68 Brew unit ....................... 69 Remove the brew unit and wash by hand............
To avoid the risk of personal injury or damage to the coffee system, it is important that you carefully read the instructions. Miele cannot be held liable for dam- age caused by non-compliance with these IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS Intended use Use this coffee system only in standard household environments for making coffee beverages such as espresso, cappuccino, latte macchiato, etc. Any other type of use is not permitted. The coffee system is not suitable for outdoor use. ...
Page 7
IMPORTANT SAFETY INSTRUCTIONS Safety with children Caution! Danger of burning and scalding on the dispensing dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee system or place parts of their body under the dispensing dispensers.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation and repairs may only be carried out by a Miele-autho- rized service technician. Installation, repairs and other work by un- qualified persons can cause considerable danger to users. A damaged coffee system could be dangerous. Before building in the machine, check it for any externally visible damage.
Page 9
Do not close the cabinet door while the coffee system is in use. Ensure the coffee system has cooled down completely before closing the door. Repair work should only be performed by a Miele-authorized ser- vice technician. Repairs by unqualified persons can cause consider- able danger to users. ...
Page 10
Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become void.
Page 11
IMPORTANT SAFETY INSTRUCTIONS Plumbing Do not connect the coffee system to a hot water supply. The non-return valve must be easily accessible when the coffee system is built in. The protective sleeve of the water intake hose must not be dam- aged or become kinked.
IMPORTANT SAFETY INSTRUCTIONS Proper use Danger of burning and scalding from the dispensers. The liquids and steam dispensed are very hot. Please note: – Keep away from the area underneath the dispensers when hot liq- uids and steam are being dispensed. –...
Page 13
IMPORTANT SAFETY INSTRUCTIONS Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain a certain amount of residual moisture. These can damage the coffee system grinder as soon as grinding begins.
Page 14
Descale the coffee system regularly depending on the water hard- ness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent that is not of the appropriate concentra- tion.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on stainless steel surfaces. These dam- age the surface, causing it to lose its dirt repellent protective coating. ...
Guide to the appliance Front view a On / Off button b Touch display c Back sensor button d Door handle e Hot water dispenser f Drip tray cover g Main dispenser, with automatic height-adjustment and lighting h Milk flask with lid...
Guide to the appliance Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Grind control lever m Coffee bean container n Water tank with intake device o Drip tray with no-spill grid p Waste unit q Drip catcher r Main dispenser connector s Service cover...
Miele website or from Miele Service or your Miele dealer. Optional accessories Included accessories Miele also offers a range of optional ac- cessories, as well as cleaning and con- – Measuring scoop ditioning products for your coffee sys- For ground coffee tem.
Operation Touch display The touch display can be scratched by pointed or sharp objects, e.g. pens and pencils. Only touch the touch display with your fingers. Touching the display with your finger emits a small electrical charge which in turn triggers an electrical pulse that is detected by the surface of the touch display.
Operation Operating actions Each time you tap a possible option, the relevant field will light up orange. To select or open a menu Tap the desired field to select it. Scrolling You can scroll to the right or the left. Some menu options allow you to scroll up and down too.
Page 21
Operation The numerical keypad will appear. Tap the desired numbers. Once you have entered an accepted value, will light up green. Tap Entering letters Profile names or the names for your own drinks are entered using a keyboard. It is best to select short names.
Page 22
Operation Help When maintenance programs are selected, a context help appears in the bottom line Help To display the information with images and text, tap Help To return to the maintenance program, tap Close...
Operation Symbols in the display The following symbols can appear in addition to the text and the drinks symbols: Symbol Description Settings, e.g., the brightness of the display or the volume of the buzzer and keypad tones, are selected via a bar chart. ...
5:00 am to 11:00 pm. Tap the On / Off button . Tap the desired time display and Miele - Willkommen appears briefly in the then display. The coffee system will use more en- ergy depending on the option you choose for the display.
Before using for the first time Select the water supply (Main Water) Water hardness The coffee system is intended for oper- The water hardness level indicates how ation with a water connection. You can much calcium is dissolved in the water. select the water supply from the follow- The higher the calcium content, the ing possibilities:...
Page 26
Before using for the first time Determining the water hardness You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area. ...
Filling the water tank Change the water every day to prevent a build-up of bacteria. If the coffee system is plumbed into the water supply, the water tank will fill au- tomatically as soon as the machine is switched on. The intake device in the lid ensures that the water is taken in slowly.
Filling the coffee bean container Fill the coffee bean container with whole roasted espresso or coffee beans if you want to use freshly ground coffee beans for each cup of espresso or cof- fee. Alternatively, you can make coffee or espresso with ground coffee (see "Mak- ing coffee drinks from ground coffee").
Turning the machine On and Off Turning on Turning off Tap the On / Off button . When the coffee system is switched on, it heats up and rinses the pipework. After a coffee has been dispensed, the This not only cleans the pipework, but machine pipework is rinsed before the also warms it before coffee is prepared.
Dispenser adjustment Turning the dispenser adjust- The height of the main dispenser can- ment on and off not be manually adjusted. The Drinks menu is displayed. The coffee system automatically de- tects the height of the cup or glass un- ...
Preparing beverages Making a coffee drink Danger of burning and scalding from the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. You can choose from a variety of spe- cialty coffees: –...
Preparing beverages Double portion Coffee pot: Preparing several cups of coffee one after the You can request two portions of other espresso or coffee at once in one cup or in two separate cups simultaneously. You can automatically prepare several cups of coffee one after the other To fill two cups at the same time: (max.1 l) using the...
Preparing beverages Open the appliance door. Making coffee drinks from ground coffee To make espresso or coffee using ground coffee, add a portion of ground coffee to the ground coffee chute. This gives you the option of preparing a cup of decaffeinated coffee, for exam- ple, even though the coffee bean con- tainer is filled with roasted coffee...
Preparing beverages Making coffee drinks from ground Drinks with milk coffee Danger of burning and scalding If you want to make a drink with ground from hot steam coming out of the coffee: main dispenser! Tap The liquids and steam dispensed are very hot.
Page 35
Preparing beverages Notes on the milk flask Milk is not cooled in the milk flask. Therefore, place the milk flask in the refrigerator if you are not going to use milk for a while. Good milk froth can only be achieved when cold milk (be- low 50°F / 10°C) is used.
Preparing beverages Preparing hot water Preparing user profile drinks If you have already created a user pro- Caution! Danger of burning and file (see "User profiles"), you can select scalding. The water dispensed is it before preparing a drink. very hot. ...
Preparing beverages After a drink has been pre- pared Start rinse cycle appears in the display a few minutes after a drink with milk has been prepared. Tap The milk pipework will now be rinsed. Even if you do not confirm the mes- sage with OK, the milk pipework will automatically be rinsed after some time.
Coffee the way you like it In order to customize the coffee system To avoid damaging the grinder, to the type of coffee being used, you please note the following: Only adjust the grinder one setting at a time. – Change the grinder setting Grind the coffee beans again if you –...
Coffee the way you like it Changing the parameters of a Amount of coffee drink The coffee system can grind and brew 6-14 g of coffee beans per cup. The You can change the amount of coffee, greater the quantity, the stronger the pre-brewing and the brewing tempera- coffee.
Coffee the way you like it Brewing temperature Pre-brewing ground coffee The ideal brewing temperature will de- When the pre-brewing function is pend on: turned on, the freshly ground coffee is first moistened with a little hot water. – the type of coffee, Then the remaining water is forced –...
Portion size The flavor of the coffee produced de- The Drinks menu is displayed. pends not just on the type of coffee Place the desired cup under the main used, but also on the amount of water dispenser. used. ...
Resetting drinks You can reset drink portions and pa- rameters for all drinks to the factory de- fault. The Drinks menu is displayed. Tap Edit and then Reset drinks Reset all drinks to default? appears on the display. Tap...
Tap Create Profile ences, you can create individual user profiles in addition to the Miele profile. The editor will open in the display. In each user profile, you can make set- Select the name you want using the...
User profiles Changing a user profile You can set up the coffee system so that after each use it automatically re- verts back to the Miele standard user profile, or it retains the last selected user profile. Select and then...
User profiles: Creating and editing your own drinks You can create your own drinks for The new drink will appear in the current each user profile and, for each drink, user profile. you can adjust the portion size and Changing drinks: Changing other parameters, e.g., amount of cof- portion sizes, parameters and fee, temperature.
MyMiele You can display drinks you make fre- Deleting entries quently, drinks from profiles, and pre- Tap Edit ferred maintenance programs in the MyMiele screen. Select Delete entry The MyMiele screen can be set to ap- Select the entry and then tap pear as the start screen (see "Settings - The entry will be deleted.
Settings You can use the "Settings" menu to Changing and saving settings customize the coffee system to suit Tap Main Menu or Back. your individual requirements. Select Settings Accessing the "Settings" menu Select the option you want to The ...
Settings Setting options The factory default for each option is indicated by *. Menu item Available settings Select language deutsch and other languages Country Time Display – Night Dimming Clock Type – Analog Digital Clock Format – 12 h (am/pm) 24 h Date Timer...
Page 49
Settings Menu item Available settings Start Screen Main Menu Drinks Profiles MyMiele Info Number of drinks – Total coffee drinks Espresso Coffee Lungo Coffee Cappuccino Latte Macchiato Caffè Latte Milk Froth Hot Milk Hot Water No. of uses until Descale Appliance / Degrease the brew unit System Lock ...
Settings Clock type Language You can display the time of day in an You can select the language (and coun- try variant of that language) for all dis- play text. Tip: If you select the wrong language by mistake, you can find the "Lan- guage"...
Settings Turn on at: Timer There are two timers with the following The coffee system will not turn on at functions: the required time if you have activated the system lock. The coffee system: The timer settings are deactivated. – switches on at a particular time, e.g. If the coffee system has turned itself on in the morning for breakfast ( Turn on...
Page 52
Settings Turn off after Activating and deactivating the timer For the time display, you have selected Turn off after timer function is only Night Dimming available in Timer 1. If the timer for Turn on at has been acti- vated, the symbol and the desired If none of the keys have been pressed or no drink has been prepared, the cof- switch-on time appear in the display...
Settings Eco mode Lighting Eco mode is an energy-saving mode. You have the following options: The steam system does not heat up un- – You can set the brightness when the til a coffee drink or steam for hot milk / machine is switched on.
Settings Start screen Locking the coffee system (System lock ) You can choose which screen appears when the coffee system is switched on. You can lock the coffee system to pre- vent it being used without your knowl- – Main Menu edge, by children, for example.
– User profiles and their drinks: See "User profiles" and "User profiles: Creating and editing your own drinks." – Drink portions and parameters of the Miele user profile (standard): see "Re- setting drinks." Showroom program (Demo mode) Do not activate this setting for domes- tic use.
Page 56
Settings lighting will come on, but drinks cannot be dispensed and other actions cannot be carried out. If you activate the Demo mode, you cannot turn the appliance off with the On / Off button .
Front of the machine (especially immediately after descaling) Once a month Lubricate the cap on the main dispenser connector Coffee bean container When prompted Milk pipework (with the original Miele cleaning agent for milk pipework) Brew unit (degrease with the cleaning tablets) Descaling the machine...
Cleaning and care Clean by hand or in dish- Danger of burning and scalding washer on hot components or by hot liquids. Always allow the coffee system to The following must be cleaned by hand cool down before cleaning it. only: Caution: Water in the drip tray can be –...
Page 59
Cleaning and care All external surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a break- age. Contact with unsuitable clean- ing agents can discolor the external surfaces. Wipe up any spillages or splashes of descaling agent immedi- ately.
Cleaning and care Drip tray Burn hazard! If the rinsing process has just fin- ished, wait a few minutes before re- moving the drip tray as the water used for rinsing will run out of the coffee dispensers. Clean the drip tray every day to pre- vent unpleasant odors and mildew.
Cleaning and care Drip tray cover Water tank Remove the drip tray cover. Change the water every day to prevent a build-up of bacteria. The drip tray cover can be cleaned in the dishwasher or by hand using Make sure that the valve, the under- warm water and liquid dish soap.
Cleaning and care Waste unit Main dispenser After a certain period of time a reminder Clean all parts of the main dispenser to empty the waste unit will appear in except for the stainless steel cover in the display. The waste unit must be the dishwasher at least once a week.
Page 63
Cleaning and care Press the catch upwards , grasp Turn upper connecting piece and the dispensing unit by the handle, pull it upwards to remove it. Remove and pull it forwards and off . lower connecting piece in the same way.
Page 64
Cleaning and care Reassemble the dispensing unit in the reverse order. Make sure that up- per adapter clicks into position. Tip: Place the dispenser upright in the Press the dispenser nozzles firmly top basket of the dishwasher. Lay the onto the dispensing unit.
Cleaning and care Sensor cover Maintenance of the milk valve The sensor cover for the cup protection The milk valve should be cleaned once cut-out is located under the main dis- a week to ensure good quality milk froth penser. If the automatic dispenser ad- without spraying.
Cleaning and care Taking apart the milk flask lid and Milk flask with lid cleaning it with the cleaning brush Soiling can lead to machine malfunc- Milk fat can deposit in the milk flask lid. tions. When this happens, milk will spray It is important to keep the neck and when milk froth is made.
Cleaning and care Bean container Pull the bean container out of the ap- pliance and pull the lid toward the back and off. Clean the bean container and its lid by hand using warm water and liquid dish soap. Dry both components. ...
Cleaning and care Interior and machine front Main dispenser connector First take out all removable parts and The part which connects the brew unit then clean the interior and the ma- and the main dispenser is located on chine front with a mild solution of hot the inside of the machine front.
Cleaning and care If you cannot remove the brew unit or Brew unit can only do so with difficulty, the brew Remove the brew unit and wash by unit is not in the correct position (See hand "Frequently asked questions"). Clean the brew unit by hand only us- When the brew unit has been pulled ing warm water.
Cleaning and care Care programs The following maintenance programs are available: – Rinsing the coffee system – Rinsing the milk pipework – Cleaning the milk pipework – Degreasing the brew unit – Descaling the machine Press the button on the end of the Perform the respective maintenance handle of the brew unit ...
Cleaning and care Rinsing the coffee system Rinsing the milk pipework After a coffee has been dispensed, the Milk residue can clog up the milk machine pipework is rinsed before it pipework. If you have made a drink with turns off. This removes any residual cof- milk, the coffee system will rinse the fee grounds.
You This has been specially developed for will only be able to make drinks with use with Miele coffee systems and pre- milk once the milk pipework has been vents subsequent damage. cleaned.
Miele cleaning tablets can be ordered Please adhere to the mixing ratio. It from a Miele dealer or from the Miele is important that you do not fill the website. water tank with too little water, other- The "Degrease brew unit"...
Page 74
Cleaning and care When Place a cleaning tablet in the ground coffee chute and close the chute appears in the display: Remove the coffee chute cover and open the lid of the coffee chute. Drop a cleaning tablet into the ground coffee chute.
Descaling the machine The coffee system prompts you when it Important! When descaling the ma- needs to be descaled. "No. of portions chine, cover delicate surfaces and until appliance needs descaling: No. of natural flooring to prevent damage uses until appliance needs descaling: 50 from splashes of descaling solution.
Page 76
Only use the Miele descaling tablets. Other types of descaling agents can damage the machine and affect the taste. Miele descaling tablets are available to order from a Miele dealer or Miele's on- line store. You will need two descaling tablets.
Page 77
Descaling the machine Performing a descale Descaling when not prompted by a message Replace the water tank in the coffee system and close the front. Tap or Back. Main Menu Follow the instructions given in the Select .
Fault messages must be confirmed with OK, otherwise the message can reap- pear in the display even though the problem has been remedied. To address the fault, follow the instructions on the display. If the fault message appears in the display again, contact Miele. Message Possible cause and solution F1, F2, F3, F4, There is an internal fault.
Page 79
Frequently Asked Questions Message Possible cause and solution F73 or The brew unit cannot be positioned correctly, or it is dirty and the coffee cannot be processed. Check the brew unit Check whether you can remove the brew unit (see "Cleaning and care - Brew unit").
Page 80
Frequently Asked Questions Message Possible cause and solution F234 Cup protection switch-off has been activated three times since switching on the coffee system. The cups or glasses being used are not recognized by the auto- matic dispenser adjustment. Use only cups or glasses that can be recognized by the automatic dispenser adjustment.
Insert the plug into the electrical outlet. The fuse has tripped because the coffee system, volt- age or another appliance is defective. Reinsert the plug.. Contact a qualified electrician or Miele Service for assistance. The lighting remains off The lighting has been turned off.
Page 82
Frequently Asked Questions Problem Possible cause and solution The coffee system does The system lock feature has been activated. not switch itself on, al- You need to deactivate the system lock (see "Set- though the timer setting tings - System lock"). Turn on at has been acti- A day of the week has not been selected.
Page 83
Frequently Asked Questions Problem Possible cause and solution The machine door will The containers are not pushed all the way in. not close. Check the containers. The door hinges are not correctly aligned. Adjust the door hinges (see "Installation - Adjust- ing the door hinges").
Page 84
Frequently Asked Questions Problem Possible cause and solution During rinsing, no or The main dispenser is not correctly mounted. considerably less rins- Make sure the main dispenser has been assem- ing water than usual bled as described (see "Cleaning and care – Main comes out of the main dispenser").
Page 85
If cup protection switch-off is activated again or vated. the main dispenser lowers until it touches the top of the cup or glass again, please contact Miele. Cup protection switch- If the cleaning container is sitting too close to the off does not work.
Fill the coffee bean container with fresh beans. There may be stones in among the coffee beans. Turn the coffee system off immediately. Contact Miele. The coffee flows too The grind level is too coarse. quickly into the cup.
Page 87
Frequently Asked Questions Problem Possible cause and solution The coffee trickles too The grind level is too fine. slowly into the cup. Set the grinder to a coarser setting (see "Setting the coffee grinder"). The crema on the cof- The grinder setting is not correct.
Frequently Asked Questions Problems when preparing milk Problem Possible cause and solution The milk sprays during The milk temperature is too high. Good milk froth can dispensing and hissing only be achieved when cold milk (below 50°F/10°C) is noises can be heard. used.
Frequently Asked Questions Exchanging the elbow connec- If you can prepare only hot milk instead of milk froth, check the following first: – Is the milk in the milk flask cold (< 50°F / 10°C)? – Have the main dispenser and milk flask lid been cleaned carefully? –...
Page 90
Frequently Asked Questions Push the tubes back into the elbow connector and replace this in the ma- chine. Make sure that the land on the elbow connector is pointing down- wards. Re-insert the air intake tube into the opening .
Miele appliance. Please note that unless expressly ap- proved in writing by Miele’s Service de- partment, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele.
Saving energy If the settings of the following functions are altered from the factory default, en- ergy consumption will increase: – Eco mode – Lighting – Time display – Timer...
Packaging material / Disposal of old machine Disposal of packaging material Disposal of your old appliance The cardboard box and packing materi- Old electrical and electronic appliances als protect the appliance during ship- often still contain valuable materials. ping. They have been designed to be However, they also contain harmful biodegradable and recyclable.
Plumbing The appliance must be connected to Notes on connecting to the a cold water line that: water supply – is directly connected to the fresh wa- The appliance must be connected to ter supply in order to ensure a circu- the water supply by a qualified pro- lation of the water in the cold water fessional.
Page 95
Plumbing Parts must only be replaced with original Miele spare parts, available from Miele. Fitting the stainless steel hose to the appliance Make sure that the stainless steel hose is not kinked or damaged. The Screw the supplied brass compres- stainless steel hose must not be sion fitting, with the 3/8"...
Page 96
Plumbing This product is tested and certified by the WQA against ORD0902 for California "lead free" compliance. Miele & Cie KG Carl-Miele-Straße 29 D-33332 Gütersloh...
All to your power supply, please consult a electrical work should be performed by licensed electrician or contact Miele’s a qualified electrician in strict accor- Technical Service Department. See dance with national and local safety back page for contact information.
Installation Installation and combination options The appliance is designed to be built into a tall unit.
Page 99
Installation It can also be combined with other Miele built-in appliances. If the coffee system is to be built in above another appliance, there must be a full-width, closed shelf be- tween them.
Installation – A ventilation gap of at least 1 Ventilation 5/8" (40 mm) depth must be provided Condensation water can damage the behind the appliance for air to circu- coffee system or surrounding cabi- late. nets. – The ventilation cross-sections in the The specified ventilation cross-sec- plinth, surrounding cabinets and tions absolutely must be observed.
Ensure the electrical and water con- If there is not a seal at the front of the nection does not get damaged when building-in niche, adhere the Miele pushing the appliance into the niche. sealing strips from the back (see pic- ture) before installing the coffee sys- ...
Installation Adjusting the door hinges If the machine door becomes difficult to open or close after installation, you can adjust the hinges to realign it (TX 20): Open the appliance door, and par- tially tighten the side socket screws. ...
You will need to enter the specific product name. Miele will provide the source code for all components of software licensed under the GNU General Public License and comparable Open Source licenses. For source code requests, please e-mail info@miele.com.
Page 107
Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
Page 108
CVA 6805 en – US, CA M.-Nr. 10 215 120 / 03...