Table of Contents
Advertisement
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
Changing the time
You cannot change the time of day if
the Duration
operates.
Press
again and again until the indicator for
the Time of Day function flashes.
To set a new time, refer to "Setting the time".
Preheating
Preheat the empty appliance to burn off the
remaining grease.
Daily use
WARNING!
Refer to Safety chapters.
Retractable knobs
To use the appliance, press the control knob.
The control knob comes out.
Activating and deactivating the top /
main oven
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
• The indicator comes on when the
oven heats up.
• The lamp comes on when the
oven operates.
• The symbol shows whether the
knob controls one of the cooking
zones, the oven functions or the
temperature.
Top oven functions
Symbol
Light
Fan Cooking
6
or End
function
Oven function
Preheat the two ovens. Heat up one
oven at a time. Set the functions
listed below, if applicable.
1. Set the function
250ºC.
Let the appliance operate for 1 hour.
2. Set the function
250ºC.
Let the appliance operate for 15 minutes.
3. Set the function
250ºC.
Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.
1. Turn the knob for the top / main oven
functions to select an oven function.
2. Turn the knob for the temperature to select
a temperature.
3. To deactivate the oven turn the knob for the
top / main oven functions to the off position.
Application
To activate the lamp without a cooking function.
To roast or roast and bake food with the same cooking
temperature, on more than 1 shelf position, without flavour
transference.
and the temperature to
and the temperature to
and the temperature to
www.zanussi.com
Advertisement
Table of Contents
