3. PUTTING THE PANEL ON TO THE BEZEL
Pay attention to the double sided tape, put the panel on to the bezel assembly as shown below.
1.Putting Panel on to bezel
(1) Put from upper side adjusting position to L/R side.
(2) Down panel on to bottom caring about fitting bezel position
ribs and panel cutout area.
(1)Put on upper side
Care about positioning rib (L&R)
<32/37/40/46/55/60 inch>
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
<22/24/26 inch>
(2)Put down
2.Lock with hooks of Bezel / Putting on "Bracket, panel"
Please lock Panel with hooks of Bezel.
<22/24/26 inch>
Put brackets and confirm fixed by hook.
<32/37/40/46/55/60 inch>
APPENDIX-2
160