Job Spool Queuing; Disabling Of Usb Memory Direct Print; Disabling Of Network Folder Direct Print; Interface Settings - Sharp MX-3070N User Manual

Hide thumbs Also See for MX-3070N:

Table of Contents

SYSTEM SETTINGS►SYSTEM SETTINGS

Job Spool Queuing

When this function is enabled, received print jobs are displayed in the spool queue of the job status screen. The jobs are

moved to the job queue after they have been analyzed by the machine.

Multiple jobs that have not yet been analyzed appear in the spool queue.

When this function is disabled, received print jobs are displayed in the job queue instead of being displayed in the spool

queue. However, when an encrypted PDF job is printed, the job appears in the spool queue.

Disables the function for directly printing of a file in a USB memory device.

Disables the direct printing from a network folder.

Disabling sending while printing

Disables the Image Send function during printing.

Settings related to the printer function can be configured.

These settings are used to control and monitor data transmitted to the USB port or network port of the machine.

This function is used to print the print data from a computer in hexadecimal format together with the corresponding

ASCII text. This mode allows you to check whether or not print data from the PC is being transmitted to the printer

Example of a hexadecimal dump

The I/O timeout can be set to any number of seconds from 1 to 999.

The I/O timeout function temporarily breaks the connection if the set duration of time elapses without any data being

received by the port. After the connection is broken, the port is set to auto selection or the next print job is begun.

Enable Network Port

Enables printing from the network port.

Network Port Emulation Switching

This setting is used to select the emulated printer language when the machine is connected by a network port.

The following settings can be configured.

• Post Script

• ESC/P (Super)

Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto".

Table of Contents

Mx-3570n Mx-4070n