Installing The Heatsink; Removing The Dc-In Connector - Dell Precision 5510 Owner's Manual
Hide thumbs
Also See for Precision 5510:
- Service manual (135 pages) ,
- Owner's manual (50 pages) ,
- Setup and specifications manual (38 pages)
Table of Contents
Advertisement
Installing the Heatsink
1.
Align the screw holes on the heatsink with the screw holes on the system board.
2.
Replace the screws to secure the heatsink to the system board.
3.
Install the:
a. battery
b. base cover
4.
Follow the procedures in After Working Inside Your Computer.
Removing the DC-in Connector
1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps to remove the I/O board:
a. Disconnect the DC-in cable from the system board [1].
b. Remove the screw that secures the DC-in cable to the computer.
c. Remove the DC-in connector from the computer.
Before Working Inside Your
Computer.
17
Hide quick links:
Advertisement
Table of Contents
