Installing The Fans; Removing The Heatsink - Dell Precision 5510 Owner's Manual
Hide thumbs
Also See for Precision 5510:
- Service manual (135 pages) ,
- Owner's manual (50 pages) ,
- Setup and specifications manual (38 pages)
Table of Contents
Advertisement
Installing the Fans
1.
Perform the following steps to install the system fan:
a. Align the screw holes on the left fan with the screw holes on the palm-rest assembly.
b. Connect the left fan cable to the system board.
c. Route the display cable through the routing guides on the left fan.
d. Replace the screws that secure the left fan to the system board.
e. Connect the right fan cable to the system board.
f. Route the touch-screen cable through the routing guides on the right fan.
g. Adhere the tape that secures the touch-screen cable to the right fan.
h. Connect the display cable to the system board.
i.
Replace the screws that secure the right fan to the system board.
2.
Follow the procedures in After Working Inside Your Computer.
Removing the Heatsink
1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
3.
Remove the screws that secure the heatsink to the system board.
4.
Lift the heatsink off the computer.
16
Before Working Inside Your
Computer.
Hide quick links:
Advertisement
Table of Contents
