I SELF DIAGNOSIS FUNCTION (DIAG)
There are 15 DIAG menu items, each of which has sub-menu items.
Listed in the table below are menu items and sub-menu items.
Note that not all menu items listed will apply to the models covered in this service manual.
No DIAG menu
1
DSP THROUGH
2
RAM THROUGH
3
DOLBY PRO LOGIC
4
SPEAKERS SET
5
HP Test
6
OTHER INPUT
7
DISPLAY CHECK
8
MANUAL TEST
9
FACTORY PRESET
10 AD DATA CHECK
/FAN TEST
sub-menu
1. ANALOG BYPASS
2. YSS 0dB
3. YSS Presence 0dB
4. YSS FULL BIT
5. YSS FULL BIT P
RAM 0dB
1. PRO LOGIC I
2. PRO LOGIC II
3. Neo:6 (Not applied to these models)
1. FRONT: SMALL 0dB
2. CENTER: NONE
3. LFE/BASS: FRONT
4. PRESENCE MIX: 5ch
5. SURROUND B power (Not applied to these models)
6. Tone Control Flat
7. Tone Control +10dB
8. Tone Control -10dB
1. FRONT 12 dB
2. FRONT 15 dB
EXTERNAL DECODER
1. VFD CHECK (Initial display)
2. VFD DISP OFF (All segments OFF)
3. VFD DISP ALL (All segments ON 100%)
4. VFD DIMMER (All segments ON 50%)
5. CHECKED PATTERN (ON in lattice)
1. TEST ALL
2. TEST FRONT L
3. TEST CENTER
4. TEST FRONT R
5. TEST SURROUND R
6. TEST SURROUND C (Not applied to these models)
7. TEST SURROUND L
8. TEST LFE
1. PRESET INHIBITED (memory initialization inhibited)
2. PRESET RESERVED (memory initialized)
1. DC/PS (protection indication)
2. THM/Fan
3. REC-OUT (Not applied to these models)
4. IMP SW/POWER LIMIT
5. K0/K1 (panel key)
6. FAN DRIVE TEST: HIGH (Not applied to these models)
7. FAN DRIVE TEST: MID (Not applied to these models)
8. FAN DRIVE TEST: LOW (Not applied to these models)
RX-V350/HTR-5730
15