hit counter script
Canon DP-V2410 Instruction Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Monitor
  5. DP-V2410
  6. Instruction manual
Canon DP-V2410 Instruction Manual

Canon DP-V2410 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Video Display

Instruction Manual

• Before use, be sure to read this guide, including the
safety and handling precautions.
• Reading this guide will help you learn to use the video
display properly.
• Store this guide safely so that you can use it in the future.
English

Advertisement

Table of Contents
loading

Related Manuals for Canon DP-V2410

Summary of Contents for Canon DP-V2410

  • Page 1: Video Display

    Video Display Instruction Manual • Before use, be sure to read this guide, including the safety and handling precautions. • Reading this guide will help you learn to use the video display properly. English • Store this guide safely so that you can use it in the future.

  • Page 2: Table Of Contents

    Table of Content Introduction ..........................4 About this manual ............................ 4 Trademarks .............................. 4 Supplied Accessories ..........................4 Safety Precautions ........................5 Handling Precautions ........................6 Features ............................8 Nomenclature ..........................9 Installation/Connection ......................11 How to Carry the Main Unit ........................11 Procedures to attach the protection panel ....................11 Procedures to attach/detach stands ....................... 12 Preventing from Tipping ......................... 13 Mounting the Main Unit on a Stand or Wall ..................... 14 Connecting the Main Unit to Input Devices .....................
  • Page 3 Signal Information ........................... 65 System Information ..........................65 Main specifications/Performance ....................66 Dimensions ............................67 Appendix ............................ 68 Supported Signal Format ........................68 Image/Frame Display ..........................79 Input Signals and Adjustable/Setting Item....................82 Error Messages .......................... 83 Troubleshooting .......................... 85 Software Used in This Product ....................87 Index ............................89 Table of Content...

  • Page 4: Introduction

    Introduction Thank you for purchasing the Video Display DP-V2410. The On Screen Display (thereafter referred to OSD) default language setting is English. To change the OSD menu language setting, please refer to p. 60. About this manual Some of the illustration used in the manual have been simplified for clarity.

  • Page 5: Safety Precautions

    For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canon U.S.A Inc. One Canon Park, Melville, NY 11747, U.S.A. Tel No. (631)330-5000 For the customers in Canada CAN ICES-3 (A) / NMB-3 (A) For the customers in Europe This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should...

  • Page 6: Handling Precautions

    Handling Precautions Places to avoid using the video display Do not use the video display in the following places or conditions. • Places with excessive dust or humidity • Places that will expose the video display to direct sunlight, smoke (such as from a kerosene heater or other such source) or steam • Near heat sources, humidifiers or flammable gas • Near a window during rain or snow • Near water or other places that could cause moisture to form on the video display Screen Handling • The screen may be damaged if it is left facing strong source of light. Please take precautions when placing it near a window. • Do not press firmly on the screen, scratch it or place an object on the screen. It can cause non-uniformity or damage to the panel. • The screen and cabinet may become warm during use. Note this does not constitute a malfunction. About Backlight The backlight has a limited service life so its brightness may degrade and color may change due to aging. About Temporary Screen burn-in If a stationary image is displayed for a prolonged period, screen burn-in may occur where you see remnants of what was displayed. This is a characteristic of LCD and is not a failure. However, this is only temporary and will disappear when playing video.
  • Page 7 Cleaning • Before cleaning, be sure to unplug the AC power supply and DC power plug from the wall outlet. • The screen has a special surface treatment, avoid touching it directly with your hand. In addition, never affix adhesive objects such as seals. • Never use alcohol or benzene, thinner, acidic cleaning solution, alkaline cleaning solution, abrasive or chemical wipes because these will damage the screen. • If the screen is dirty, wipe gently with soft dry cloth such as cleaning cloth or eye glasses cleaning cloth. Wiping the screen too hard may cause unevenness on the screen or damage the LCD panel. The screen may be scratched if wiped too hard with a cleaning cloth with foreign particles attached. • When the screen is extremely dirty, wipe with soft cloth such as cleaning cloth or eye glasses cleaning cloth moistened with water-diluted neutral detergent. • Use a blower to remove dust from the surface of the screen. • Wipe dirt on cabinet with a soft cloth. If the screen is very dirty, use a moistened cloth with water or mild detergent diluted with water. Do not use alcohol, benzene, paint thinner, or pesticides as they may damage the surface finish or erase characters on the cabinet. Disposing • Do not dispose together with normal waste. Do not include the video display in waste that will be taken to landfill. • Observe the rules and regulations of your local authorities when disposing. Handling Precautions...

  • Page 8: Features

    - Supports "Boost Contrast" to increase the brightness when used in a bright place. - Displays ITU-R BT.2020 color gamut at the optimum level and supports "Constant Luminance". • Equipped with the High Dynamic Range (HDR) display function. • Supports ACESproxy (ACES 1.0). • Equipped with functions to assist shooting and video checking including Wave Form Monitor, Vector Scope, Screen Capture, Zoom, and False Color. • Supports gamma equivalent to CRT standardized by ITU-R BT.1886. • A color grading controller (Element-Tk made by Tangent Wave Ltd), external sensor, or USB memory can be connected to the USB port. • Separately-sold Display Controller CL-01 can be connected to the LAN terminal. • Equipped with a HDMI input terminal. Use with other Canon equipment • Supports 4K RAW. • Establishes 4K RAW workflow on ACES. • Can be used with Cinema EOS System cameras. - Equipped with functions to automatically display a camera's shooting information and switch image quality modes by using meta information of the camera. - Special gamma for "Canon Log 2" that EOS C300 Mark has is available. • It can display data on Canon cameras supporting HDMI Time Code output. • Equipped with the Fan Stop function interlocked with the REC signal of Canon professional-use video cameras. Portability • Small, light-weight body with a 24-inch panel and weight of less than 12 kg • High durability achieved by a metal outer covering...

  • Page 9: Nomenclature

    Nomenclature ■ Front face of the main unit Stand There are two mounting positions. Headphone terminal Connection for headphone set. USB port Connection for an external sensor for calibration ( 22), USB memory, HUB, or color – grading controller (Element-Tk made by Tangent Wave Ltd). CH1 to 3 buttons Changes channel. CDL button Switches between normal and CDL mode. – F1 to F8 buttons Execute the defined function. You can assign different functions on F buttons in the normal and CDL modes respectively. MENU button Opens/closes the OSD menu, or moves up one level in a menu. Jog dial Moves the selection frame within the OSD menu, changes the settings (up/down, left/ right, rotation) and determines (press) the selection. RESET button Resets the items to be adjusted using the slider and entered characters. (Power) button Turns power On/Off. Power indicator Displays the status of the main unit. The brightness of the power indicator can be set from "Off" or "1 (dark) to 5 (brightest)" ( 62). Even when the power indicator is "Off", it will flash during firmware upgrade, or when an error is detected. Off: when AC or DC power supply is not connected Green lit: when an AC or DC power supply is connected and the power of the video –...
  • Page 10 ■ Back face of the main unit A f A g A h Carrying handle Used to install, connect, or carry the unit. HDMI input terminal Used to input HDMI signals. LAN (10/100 BASE) Connection for a Display Controller CL-01 (separately sold) or other equipment. – terminal 3G/HD-SDI output Pass through output corresponding to 3G/HD-SDI input terminal. – terminal 3G/HD-SDI input Used to input SDI signals. terminal DC power input Connection for DC power supply. terminal AC power input Connection for the provided AC power supply cord. terminal CAUTION • When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise, communication error may occur and correct calibration may not be possible. • For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when connecting peripheral devices.

  • Page 11: Installation/Connection

    Installation/Connection How to Carry the Main Unit When lifting the video display, be sure to hold the carrying handle on the back. CAUTION • When carrying the video display, handle it carefully not to touch or damage the screen. Procedures to attach the protection panel You can attach the protection panel to protect the screen when carrying the video display or when using it outdoors. 1. Unscrew the four screws on the front face. Use a 1.5 mm hexagonal key. Do not lose the removed screws. Do not use these screws for other purposes. 2. Place the protection panel by aligning its corners with the screw holes. ( 67).

  • Page 12: Procedures To Attach/Detach Stands

    Procedures to attach/detach stands The stand can be attached in two different positions. This section describes the procedure to attach/detach the stand, to change the stand position. It also describes the procedure for installing the video display on a rack or a wall. CAUTION • Use a flat, clear surface when attaching/detaching the stand. • The display can tip over if the stand has not been attached. • Avoid touching the screen during this step as it may damage it. ■ Detaching 1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display. 2. Remove four fixing screws. Do not lose the removed screws. Do not use these screws for other purposes.

  • Page 13: Preventing From Tipping

    Preventing from Tipping Fixing the video display using screw holes on the stands can reduce the risk of the main unit tipping over or falling. 1. Use screws that fit the screw holes. The screw hole size is shown below. Screw hole 4× 4.5 CAUTION • When securing the main unit to a table or desk, please ensure a table or desk is strong enough to carry the weight of the main unit. • It is recommended to obtain assistance from another person when performing this step. • Avoid touching the screen during this step as it may damage it. Installation/Connection...

  • Page 14: Mounting The Main Unit On A Stand Or Wall

    Mounting the Main Unit on a Stand or Wall This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand ( 12). Screws compatible with this main unit are M4 x 7 mm (VESA Standard 100 x 100 mm). * Commercially available. CAUTION • For safety, make sure to perform this step with at least two people. • When mounting the main unit on a wall, make sure the wall has sufficient strength. If necessary, apply reinforcement. Also, make sure to check the load capacity of the stand or wall mount bracket. • When the video display is placed on a rack or display stand and ventilation around it is blocked by equipment placed above or below or in a surrounding area, the operating temperature may increase, causing a failure or overheating. In order to maintain the operating temperature condition of the video display (0 ˚C to 40 ˚C), make a space of at least 1U (4.4 cm) above and below and at least 4 cm space from its back. Make a sufficient space from peripheral equipment, secure vents, or install a ventilation fan. • When installing the video display on a wall, make sufficient space from the wall so that cables are not squeezed or twisted. • When mounting a commercially available stand or wall mount bracket, be sure that they do not contact the carrying handle. • Avoid touching the screen during this step as it may damage it. • Make sure that the main unit does not fall during installation/removal. 1. Attach a commercially available stand or wall mount bracket using four screw holes on the back or side face of the main unit ( 67).

  • Page 15: Connecting The Main Unit To Input Devices

    Connecting the Main Unit to Input Devices The video display has 3G/HD-SDI and HDMI input terminals that input devices are connected to. CAUTION • Check that the power of the video display and input devices is switched off before connecting. ■ To input 4K signals using 3G/HD-SDI input terminal • 3G/HD-SDI 3G/HD-SDI has four inputs which correspond to a display area. The display area icons located in the 3G/HD-SDI input terminal area show where the input video is displayed on the screen. Please ensure these are connected correctly as indicated by the icons. Display area icon SDI (IN) terminal • 3G-SDI RAW To input 3G-SDI RAW, signals with a frame rate of 30.00 P or smaller can be input using one input in Input A-D. Signals with a frame rate over 30.00 P require two inputs either Input A and Input B or Input C and Input D. When the frequency is 30.00P or less When the frequency is over 30.00P Input A Input A and Input B Input B...
  • Page 16 ■ To input signals from the HDMI input terminal HDMI input terminal CAUTION • Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable is used, the video display may not work normally, for example a video becomes choppy or nothing is displayed. Installation/Connection...

  • Page 17: Turning On The Power

    • When an AC power supply is connected during the use of a DC power supply, the power source is switched to the AC power supply. When this happens, the power is turned off temporarily and then turned on again. • Refer to the Canon website for detailed information about DC power supplies for which operation has been confirmed. Turning on the Power...

  • Page 18: Operating The Video Display

    Operating the Video Display Using buttons and jog dial on the video display, you can adjust image quality and configure settings for input signals. In addition, you can assign the frequently used functions to the CH and F buttons. Operating the jog dial The procedures to operate the jog dial are described below. MENU button RESET button Opens/closes the OSD Resets the items to be adjusted using the slider and menu, or moves up one entered characters. level in a menu. Jog dial Up, down, left, right / rotation: Used to move to a different item and change settings. Press: C onfirms settings or moves the selection frame up/down 1 level. Basic operations to use the OSD menu Top Screen Main Menu Sub Menu Setting Options This section describes basic operations to use the OSD menu. 1. Press the MENU button to open the OSD menu. Operating the Video Display...
  • Page 19 2. Select an item using the jog dial and press it to determine the selection. The selection frame moves to sub menu. 3. Select an item using the jog dial and press it to determine the selection. The selection frame moves to setting options. 4. Select the setting using the jog dial. Settings change according to the operation of the jog dial.

  • Page 20: Adjusting Image Quality While Viewing The Entire Image

    Adjusting Image Quality While Viewing the Entire Image You can adjust the OSD menu to display as a slider at the bottom of the screen. This allows for the image quality to be adjusted whilst it is displayed on the screen. 1. Press the jog dial when the selection frame is on setting options. A slider appears at the bottom of the screen. 2. Make adjustments using the jog dial with using the slider as guide. 3. When adjustments are completed, press the jog dial. The screen returns to the original OSD menu.

  • Page 21: Temporarily Saving Parameters (Anchor Point Setting)

    Temporarily Saving Parameters (Anchor Point Setting) You can temporarily save parameters for "Contrast", "Brightness", "Chroma", and "Sharpness" and recover the values. See 39 for setting anchor points during CDL adjustment. 1. Press the MENU button to open the OSD menu. 2. Select "Adjustment" using the jog dial and press the dial to determine the selection. The selection frame moves to sub menu. 3. Select "Anchor Adjustment" using the jog dial and press the dial to determine the selection. When the confirmation screen appears, select "OK". The parameter is saved and sets anchor point.

  • Page 22: Calibration Without A Pc

    Calibration without a PC ( When "User 1-7" under "Picture Mode" is selected, you can perform calibration using an external sensor, without using the computer. The supported external sensors are Konika Minolta Display Color Analyzers CA-310 and CA-210. Be sure to also read the instruction manual of the CA-310 and CA-210. 1. Connect the display color analyzer to the USB port of the main unit. 2. Open the OSD menu and select "Adjustment" → "Detail Settings" → "Calibration". Set each target value. 3. Press the jog dial and select "Start". Please follow the information indicated on the screen.

  • Page 23: Export/Import

    5. Select "Select LUT" using the jog dial. Selects User LUT 1-8. 6. Select the standard color gamut using the jog dial. Select the color gamut used when creating the LUT (when "Color Gamut" under "LUT Type" is selected). 7. Select "Execute" using the jog dial. When the confirmation screen appears, select "OK". Import starts. Note • The LUT file is proprietary to Canon Video Display. Refer to the Canon website for the file format and how to create. • Up to 1000 LUT import files are recognized. • You can delete the imported LUT. You can specify the name of LUT ( 39). Operating the Video Display...
  • Page 24 ■ Export/Import Main Menu Settings ( 1. Press the MENU button to open the OSD menu. 2. Select "System Settings" → "Export/Import". 3. Select "Export" or "Import" using the jog dial. Exporting - Select "Target" from "USB" or "User 1-3". Export "USB" to the USB memory and "User 1-3" to the built-in memory of the main unit. - Select "Filename". Factory default is "dinfo_dpv2410.dat". You can change the name of the file to be exported to the USB memory within 16 one-byte characters including alphabetical characters, numbers, and symbols. - Select "Execute". When the confirmation screen appears, select "OK". Export starts. Importing - Select "Target" from "USB" or "User 1-3".

  • Page 25: Set Date/Time

    Set Date/Time ( This section describes how to set the Date/Time. The Date/Time of this video display will be reset if the power cord is not connected for about 20 days. 1. Press the MENU button to open the OSD menu. 2. Select "System Settings"→"Date/Time". A screen to input the Date/Time appears. 3. Move the selection frame using the jog dial. Numbers change as you operate the jog dial. Repeat until you complete setting the year, month, date, hour, and minute. 4. Press the jog dial when you are finished. The selection frame moves to "OK".

  • Page 26: Using The Function (F) Buttons

    Using the Function (F) Buttons You can assign functions to the F buttons on the video display to execute them instantly. 1. Press the MENU button to open the OSD menu. 2. Select "System Settings" → "Function/Channel Button" → "Display Function" or "Display Function (CDL)" and press the jog dial to determine the selection. A new window opens and displays button names F1 to F8. 3.

  • Page 27: Using The Channel (Ch) Button

    Automatic Automatic Automatic Internal Sync Channel Name (Blank) (Blank) (Blank) Picture Mode ITU-R BT.709 ITU-R BT.709 Canon Log Color Range Automatic Automatic Automatic Checking Signal Information and Status of the Main Unit The video display is equipped with a banner function which displays signal information or the status of the main unit. 1. Press the jog dial when the OSD menu is closed. The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically disappear after 6 seconds. Note • For more detailed signal information, please refer to the section on "Signal Information" (...

  • Page 28: Osd Menu

    OSD Menu OSD Menu Index Adjustment ( Picture Mode Contrast Brightness Chroma Sharpness Backlight Control Color Temperature Color Gamut Gamma HDR Range ODT Surround Color Range CDL Preset Power Saturation Offset Slope CDL Bypass Detail Settings CDL Export CDL Import CDL Preset Name Anchor CDL Reset CDL Detail Settings Boost Contrast LUT Import LUT Name LUT Delete 2020 Constant Luminance 2020 Gamut Mapping Calibration Copy Picture Mode Picture Mode Name Anchor Adjustment Reset OSD Menu...
  • Page 29 Channel Settings ( Select Channel Input Configuration Select Input Signal Format Internal Sync Channel Name Picture Mode Color Range Display Settings ( Screen Scaling Zoom Scaling Method Frame Hold Background Color I/PsF I/P Conversion Film Cadence Audio Settings ( SDI Group CH L/R (SDI) CH L/R (HDMI) Volume Audio Switch Select Input OSD Menu...
  • Page 30 Marker Settings ( Marker Preset Aspect Marker Enable Mask Aspect Ratio Line Line Width Line Color Line Brightness H Position V Position Safety Zone Marker 1, 2 Enable Aspect Ratio Area Size Rate (%) Width (dot) Height (dot) Shape Line Width Line Color Line Brightness H Position V Position Area Marker Enable H Position V Position Width (dot) Height (dot) Mask Line Line Width Line Color Line Brightness Center Marker Enable Size Line Width Line Color Line Brightness OSD Menu...
  • Page 31 Grid Marker Enable Distance Line Width Line Color Line Brightness Function Settings ( Peaking Enable (Peaking 1/Peaking 2/Off) Monochrome Frequency Range Color False Color Screen Capture Capture Frame Hold Capture Source Playback File Finish Playback File Time Code Enable Type Size Position Wave Form Monitor Enable Select Signal Display Type Select Line Position Guide Standard Level High Standard Level Low Color Vector Scope Enable Target Position OSD Menu...
  • Page 32 Audio Level Meter Enable Channel Number (SDI) Channel Number (HDMI) Peak Hold Standard Level Test Pattern Various Function Monochrome, Blue Only, Red Off, Green Off, Blue Off, Banner, Function Guide, OSD Position, OSD Size, Backlight Scan Camera Link Adjustment Color Gamut / Gamma Color Temperature Color Range Display Color Gamut Camera Information System Settings ( Network Language Function/Channel Button Display Function Display Function (CDL) Display Channel Display Name Date/Time Power Indicator Brightness Display Button LED Compatible Settings Firmware Update Protect Settings Password Protect Target Protect Fan Settings Fan Control Fan Stop Export/Import Export Import Power on Setting Reset All Settings OSD Menu...
  • Page 33 Signal Information( Channel Input Configuration Select Input Signal Format Resolution Picture Rate, I/P/PsF SDI Payload ID Video Standard Sampling Structure Bit Depth Picture Rate Scanning Method Link Number Pixel Encoding Color Depth Matrix RGB Range System Information ( Display Model Name Display Serial No. Display Firmware Ver. Display Usage Time Display IP Address Display Subnet Mask Display MAC Address OSD Menu...

  • Page 34: Adjustment

    Adjustment This menu is used to adjust the image quality and perform calibration without a PC. Item Setting Options (underline indicates factory default) Picture Mode Select a preset mode. See 41, 42 for each setting. SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3: Mode set to the brightness, color temperature, gamma, and color gamut of the three primary colors chromaticity points of each standard. User 1-7: Custom modes. Set each item of "Adjustment". You can change the mode name within 16 one-byte characters including alphabetical characters, numbers, and symbols. Canon Log: Canon Log is ideal when viewing image captured with CINEMA EOS SYSTEM camera/ video camera. Performs linear conversion and displays Canon Log video without having to import Viewing LUT. ACESproxy: A mode to display ACESproxy (ACES 1.0) videos in optimum gamma and color gamut. Contrast Adjusts the white level of the image. (Increments of 1) When "Boost Contrast" is "On", "Contrast [BOOST]" is displayed. 0 to 1500  When "Boost Contrast" in "Detail Settings" is set to "On", the settable range is shown below. 1500 to 4000 Brightness Adjusts the black level of the image. (Increments of 1) -500 to 500 Chroma Adjusts the color saturation of the image (color depth). (Increments of 1) 0 to 2000 Sharpness Adjusts the sharpness of the image. (Increments of 1)
  • Page 35 Cinema Gamut to 709, Cinema Gamut to 2020, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI, DCI-P3 to 709, ITU-R BT.2020 to 709: Modes where the color gamut is converted to monitor Cinema Gamut, DCI-P3+, BT.2020, and DCI-P3 videos recorded by the CINEMA EOS SYSTEM EOS C500/C500PL and C300 Mark II ACESproxy: Displays the color gamut of ACESproxy. User LUT 1-8: Sets by loading an external LUT. Note • For checking the video captured with Cinema EOS System, please refer to the "Parameter of Cinema EOS System and DP-V2410 ( 58)" in "Adjustment". • When "ITU-R BT.2020", "Cinema Gamut to 709", "Cinema Gamut to 2020", "Cinema Gamut to DCI", "DCI-P3+ to 709", "DCI-P3+ to DCI", "DCI-P3 to 709", or "ITU-R BT.2020 to 709" is selected, the DP-V2410 displays images after converting the color gamut as shown below. Data outside of the color gamut after conversion is also displayed at the optimum level. Input video color gamut Color gamut after conversion on the DP-V2410 ITU-R BT.2020...
  • Page 36 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log 2: Select the preset gamma. Canon Log (HDR), Canon Log 2 (HDR), SMPTE ST 2084: Select the gamma for HDR display. User LUT 1-8: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT and configure.
  • Page 37 Item Setting Options (underline indicates factory default) HDR Range Setting is enabled when "Canon Log (HDR)", "Canon Log 2 (HDR)", or "SMPTE ST 2084" is selected for "Gamma". Canon Log (HDR): Sets the dynamic range to be displayed from 0 to 800% that "Canon Log" has. 100 to 800% (in 100 increments) Canon Log 2 (HDR): Sets the dynamic range to be displayed from 0 to 1600% that "Canon Log 2" has. 100 to 1600% (in 100 increments) SMPTE ST 2084: Sets the dynamic range to be displayed from 0.005 to 10,000 nit that "SMPTE ST 2084" has. 100 to 4000 (2000) nit (in 100 increments)  Setting procedures The procedures below use Canon Log (HDR) as an example. When the maximum value (800%) is specified, the 800% dynamic range of Canon Log is assigned to the dynamic range of the video display. Although the brightness in appearance lowers, you can check the dynamic range included in video signals. When 400% is specified, part exceeding 400% is clipped (gradation is saturated) and part up to 400% is assigned to the dynamic range of the video display.
  • Page 38 Item Setting Options (underline indicates factory default) ODT Surround This is displayed instead of "Gamma" and "Color Gamut" when "Picture Mode" is set to "Canon Log" and "ACESproxy" is selected for "Color Gamut" or when "ACESproxy" is selected for "Picture Mode". Dim Surround: E nables Dim Surround process specified by ACESproxy (ACES 1.0). Dark Surround: Enables Dark Surround specified by ACESproxy (ACES 1.0). Color Range Sets the quantization range for SDI and HDMI respectively. Automatic: Sets the range based on signal information automatically. Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit). Limited 1 (16-235): Limits the black and white range. Black level: 64 (10-bit)/256 (12-bit) White level: 940 (10-bit)/3760 (12-bit) Limited 2 (16-255): Limits the black range. Black level: 64 (10-bit)/256 (12-bit) White level: 1023 (10-bit)/4095 (12-bit) Note • Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut". • Operations when "Automatic" is selected are described below. When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending on HDMI signal information.
  • Page 39 Item Setting Options (underline indicates factory default) Configures settings for CDL. CDL files created on Canon Video Display DP-V3010 can also be used because the file type is the same. CDL Preset Sets CDL preset. Imported LUT can also be set as preset. CDL 1-15, User LUT CAUTION • When "User LUT" is selected, all "CDL" items, "Chroma", and "Blue Only" cannot be changed. Power Adjusts the gamma (in 0.01 increments). 0.50 to 4.00 (1.00) Saturation Adjusts the color saturation of the image (in 0.001 increments). 0.000 to 2.000 (1.000) Offset Adjusts the black level (in 0.001 increments). -1.000 to 1.000 (0.000) Slope Adjusts the white level (in 0.001 increments). 0.000 to 2.000 (1.000) CDL Bypass When "CDL Bypass" is set to "On", you can temporarily disable the CDL adjustment result and...
  • Page 40 Mode". Constant Luminance: YUV signals are linearly converted and then converted into RGB signals. Non-constant Luminance: YUV signals are converted into RGB signals without changing gamma 0.45. Note • SD-SDI is fixed to "Non-constant Luminance". 2020 Gamut Set this item when "ITU-R BT.2020" is selected for "Picture Mode" or when "User 1-7" or "Canon Mapping Log" is selected for "Picture Mode" and also "ITU-R BT.2020" is selected for "Color Gamut". Gamut Mapping: Mapping is performed on colors outside the native color gamut by Canon's unique method. Clipping: Colors outside the native color gamut are clipped by a general method. Calibration Performs calibration based on set target values when "User 1-7" is selected for "Picture Mode". Luminance: Sets the target luminance. 48 to 150 (100) cd/m Color Temperature: Sets the target color temperature. D93, D65, D61, D60, D56, D50, DCI-P3: Select from preset color temperatures. Custom (xy): You can adjust CIE x, y in increments of 0.001. x: 0.260 to 0.360 (0.313)/y: 0.260 to 0.360 (0.329) Color Gamut: Sets the color gamut.
  • Page 41 The factory default settings for each "Picture Mode" is as follows: ITU-R ITU-R Adobe Item SMPTE-C BT. 709 BT.2020 Contrast 1000 1000 1000 1000 1000 Brightness Chroma 1000 1000 1000 1000 1000 Sharpness Local Dimming High High High High High Color Preset Temperature 0.313 0.313 0.313 0.313 0.313 0.329 0.329 0.329 0.329 0.329 Gain R/G/B...
  • Page 42 User Item DCI-P3 Canon Log ACESproxy Contrast 1000 1000 Brightness Chroma 1000 1000 1000 1000 Sharpness Local Dimming High High High High Color Preset DCI-P3 Temperature 0.314 0.313 0.313 0.322 0.351 0.329 0.329 0.338 Gain R/G/B 1023 1023 1023 1023 Bias R/G/B Gamma Canon Log –...

  • Page 43: Channel Settings

    Channel Settings This menu is used for input related settings. Select the "Select Channel" and choose a channel number from CH1 to CH30. Finally define the parameter of each of the "Channel Settings". Item Setting Options (underline indicates factory default) Select Channel Display the channel number. In addition, you can assign each content of "Channel Settings" to each channel ( 44). CH1 to CH30 Note • It may take 10 seconds when switching channels. Input Configuration Select the input. Factory default depend on the channel ( 44). 3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, — (Not set) Select Input Signal Sets the signal display method ( 15). Automatic: "4K Input" and "Single Input/Dual Input" are automatically determined. 4K Input: Displays the signal transmitted over four inputs. Single Input/Dual Input: Displays the signal of a single input (Single Input A-D) or dual input (Dual Input A, B or C, D) onto the center of the screen. Note • For HDMI, the setting is fixed to "Automatic".
  • Page 44 Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit). Limited 1 (16-235): Limits the black and white range. Black level: 64 (10-bit)/256 (12-bit) White level: 940 (10-bit)/3760 (12-bit) Limited 2 (16-255): Limits the black range. Black level: 64 (10-bit)/256 (12-bit) White level: 1023 (10-bit)/4095 (12-bit) Note • Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut". • Operations when "Automatic" is selected are described below. When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending on HDMI signal information. When "DCI-P3" is selected for "Picture Mode", or "DCI-P3", "Cinema Gamut to DCI" or "DCI-P3+ to DCI" is selected for "Color Gamut", "Full (0-255)" is set. When "Canon Log" or "Canon Log 2" is selected for "Gamma", "Limited 2 (16-255)" is set. "Limited 1 (16-235)" is set in the other cases. The factory default settings for each channel is shown in the following table. CH4 to CH30 Input Configuration 3G/HD-SDI HDMI 3G-SDI RAW – Select Input Signal Automatic Automatic Automatic Automatic Format Automatic...

  • Page 45: Display Settings

    Display Settings This menu is used to configure the display method. Item Setting Options (underline indicates factory default) Screen Scaling Defines how the video is scaled and displayed on the screen. Native Input Resolution: Displays the input signal without scaling. 1920x1080 (original) 200%: Doubles the vertical and horizontal dimensions. 1920x1080→3840x2160 Automatic: Enlarges to full screen. 1920x1080→3840x2160 Note • When "Peaking" or "False Color" is "On", the magnification is up to 200%, even if "Automatic" is selected. Zoom When the resolution is 4096x2160 or 3840x2160, the enlarged image is displayed at the center of the screen or at the position selected screen of a 4-screen layout. Center, Top Left, Top Right, Bottom Left, Bottom Right, Off Left Top Right Top Center Left Bottom Right Bottom Note...
  • Page 46 Item Setting Options (underline indicates factory default) Scaling Method Sets the interpolation method when "Screen Scaling" is set to "200%" or "Automatic". Shape Trace: Canon original processing that produces smooth slopes with reduced jagged lines. Bicubic: General interpolation process that uses neighboring pixel information to create interpolated pixels. Nearest Neighbor: Process that uses nearest neighbor pixel information to create (copy) new pixels. This is useful as it enlarges the original pixels, thus making any jagged lines visible. Frame Hold Pauses the video. On, Off Note • Setting is disabled when "Peaking" is set to "On" or "False Color" is set to "On". Background Color Sets the color of the black band to check the boundary of the black band and video image. White, Gray, Off I/PsF Defines how the interlace signal or PsF signal is displayed. Automatic: Automatically determined based on payload and displayed. If there is no payload, the signal is displayed as an interlace signal. Interlace: Displayed as an interlace signal. PsF: Displayed as a PsF signal. I/P Conversion Sets the interlaced signal I/P conversion method. Image Priority: This mode gives priority to image quality. Processing time will be longer than "Speed Priority". Speed Priority: This mode gives priority to speed.
  • Page 47 Item Setting Options (underline indicates factory default) Film Cadence Sets the film cadence mode ( 82). 2-2: Displays progressive image after conversion for 2-2 pulldown processed interlaced signal input. 2-3: Displays progressive image after conversion for 2-3 pulldown processed interlaced signal input. 2-3-3-2: Displays progressive image after conversion for 2-3-3-2 pulldown processed interlaced signal input. Off: Does not perform film cadence mode progressive conversion. Note • This can be set only when "I/P Conversion" is set to "Image Priority". OSD Menu...

  • Page 48: Audio Settings

    Audio Settings This menu is used to set audio output from the headphone terminal. Item Setting Options (underline indicates factory default) Audio Settings Sets the headphone terminal audio. SDI Group Switches the audio group to be input during SDI audio input. CH1-CH8, CH9-CH16 CH L/R (SDI) Sets the audio to be output from the two channels (L/R) of the headphone respectively. The options differ according to the "SDI Group" setting. When "CH1-CH8" is selected for "SDI Group": CH1-CH8 When "CH9-CH16" is selected for "SDI Group": CH9-CH16 CH L/R (HDMI) Sets the audio to be output from the two channels (L/R) of the headphone respectively. CH1-CH8 Volume Sets the volume. 0 to 100 (30) Audio Switch Sets the stereo output. L R, L, R, MIX (L+R) Select Input Sets the audio terminal to be used when "4K Input" is selected. Single Input A-D (Input A) OSD Menu...

  • Page 49: Marker Settings

    Marker Settings This menu is used to configure various markers. Item Setting Options (underline indicates factory default) Marker Preset Customizes markers which are assigned to markers 1 to 5. Marker 1 to 5, Off Aspect Marker "Aspect Marker" displays a range in accordance with the specified aspect ratio. Note "Aspect Marker" is not displayed in the following cases: • When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is selected • When an enlarged image is displayed • During the execution of "Playback File" under "Screen Capture" • When a "Test Pattern" is displayed Enable Switches the aspect marker On, Off. On, Off Mask Switches the mask color. Mask is the blanking area outside the range of the marker. Black: Half (50% gray): Off: Turns mask off. Aspect Ratio Sets the aspect ratio of the aspect marker. 16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The grayed out slider becomes active and can be used to set the aspect ratio.
  • Page 50 Item Setting Options (underline indicates factory default) Line Color Sets the color of the aspect marker line. White, Red, Green, Blue, Yellow, Cyan, Magenta Line Sets the brightness of the aspect marker line. Brightness High, Low H Position Changes horizontal position without changing the aspect. -65 to 65 (0) V Position Changes vertical position without changing the aspect. -35 to 35 (0) Safety Zone Marker 1, 2 There are two types of "Safety Zone Marker": 1 and 2, which share the same settings. A safety zone marker is used to set the safe zone of the image (actual displayed area) to check the image. Note "Safety Zone Marker" is not displayed in the following cases: • When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is selected • When an enlarged image is displayed • During the execution of "Playback File" under "Screen Capture" • When a "Test Pattern" is displayed Enable Switches the safety zone marker On, Off.
  • Page 51 Item Setting Options (underline indicates factory default) Shape Sets the area shape of the safety zone marker. Box: Bracket: Enclosure: Line Width Sets the width of the safety zone marker line. Thick, Normal, Thin Line Color Sets the color of the safety zone marker line. White, Red, Green, Blue, Yellow, Cyan, Magenta Line Sets the brightness of the safety zone marker line. Brightness High, Low H Position Adjusts the marker horizontal position with the set aspect and size. -65 to 65 (0) V Position Adjusts the marker vertical position with the set aspect and size. -35 to 35 (0) OSD Menu...
  • Page 52 Item Setting Options (underline indicates factory default) Area Marker "Area Marker" is used to check a specific area using a rectangular box. Note "Area Marker" is not displayed in the following cases: • When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is selected • When an enlarged image is displayed • During the execution of "Playback File" under "Screen Capture" • When a "Test Pattern" is displayed Enable Switches the area marker On, Off. On, Off H Position Sets the start position (x-coordinate) to draw the rectangle (in increments of 2). 0 to 4086 (240) V Position Sets the start position (y-coordinate) to draw the rectangle (in increments of 2). 0 to 2150 (120) Width (dot) Sets the width of the rectangle (in increments of 2). 10 to 4096 (240) Height (dot) Sets the height of the rectangle (in increments of 2).
  • Page 53 Item Setting Options (underline indicates factory default) Center Marker "Center Marker" shows the center of the image. Note • "Center Marker" is not displayed when an enlarged image is displayed. Enable Switches the center marker On, Off. On, Off Size Sets the size of the center marker. Large, Small Line Width Sets the width of the center marker line. Thick, Normal, Thin Line Color Sets the color of the center marker line. White, Red, Green, Blue, Yellow, Cyan, Magenta Line Sets the brightness of the center marker line. High, Low Brightness Grid Marker "Grid Marker" is marker used to check the horizontal and vertical position.

  • Page 54: Function Settings

    Function Settings This menu is used to set functions to link with Cinema EOS System cameras and video assistance functions. Item Setting Options (underline indicates factory default) Peaking Customizes peakings which are assigned to Peaking 1 or Peaking 2. The outline is displayed in a color, used to check the focus. Note • "Peaking" cannot be displayed during the execution of "Playback File" under "Screen Capture". Enable Switches the peaking display mode and also sets peaking to Off. Peaking 1, Peaking 2, Off Peaking 1, 2 Monochrome: Displays video in monochrome. On, Off Frequency: Sets the central frequency of contour enhancement signals. Peaking 1 (High, Middle, Low), Peaking 2 (High, Middle, Low) Range: Sets the width of the range to be colored. -3 ~ +3 (0) Color: Sets the color to be used.
  • Page 55 Item Setting Options (underline indicates factory default) Playback File Plays back captured images. Select File: Selects a file. Execute: Plays back the image. Note • When playing back captured images on other DP-V2410 or PC, color may not be played back precisely. Finish Finishes playback. Playback File Time Code Display the time code superimposed on the SDI signal. VITC 01:23:45.05 Note • "Time Code" cannot be displayed when "Frame Hold" is "On", during the execution of "Playback File" under "Screen Capture", or when "Test Pattern" is displayed. Enable Switches the time code display On, Off. On, Off Type Selects the type. VITC, LTC Size Selects the size. Large, Small Position Selects the display position.
  • Page 56 Item Setting Options (underline indicates factory default) Display Type Sets the display type. When "Line" is selected, data for one line is displayed. All, Line Selects the line to be displayed when "Line" is selected. Select Line: 1 to 2160 Position Selects the display position. Bottom Left, Bottom Right Guide A guide is displayed at the specified position. "Guide" is not displayed when "255" is selected. 1 to 255 Standard Sets the standard display level (high). "Standard Level High" is not displayed when "255" is selected. Level High 190 to 255 Standard Sets the standard display level (low). "Standard Level Low" is not displayed when "0" is selected. Level Low 0 to 64 Color Sets the signals to be displayed and the color of signals exceeding the standard level.
  • Page 57 Item Setting Options (underline indicates factory default) Audio Level Meter Configures various settings for the audio level meter. Displays the audio level of the selected channel number. Note • "Audio Level Meter" cannot be displayed when "Frame Hold" is "On", during the execution of "Playback File" under "Screen Capture", or when "Test Pattern" is displayed. Enable Switches the audio level meter On, Off. On, Off Channel Sets the number of channels displayed when SDI signal is input. Options change according to the Number (SDI) setting for "SDI Group" under "Audio Settings". When "CH1-CH8" is selected for "SDI Group": 2 CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8) When "CH9-CH16" is selected for "SDI Group": 2 CH (CH9-CH10), 4CH (CH9-CH12), 6CH (CH9-CH14), 8CH (CH9-CH16) Channel Sets the number of channels displayed when HDMI signal is input.
  • Page 58 Function Guide On: You can display the list of functions assigned to an F button on the video display by pressing the jog dial while OSD is closed. Off: Function guide is not displayed. OSD Position Mode 1 (4096x2160): OSD is displayed in a 4096x2160 area. Mode 2 (3840x2160): OSD is displayed in a 3840x2160 area. OSD Size: The size of the OSD menu can be selected from "Large" and "Small". Camera Link Sets the functions to link with Cinema EOS System cameras. Adjustment Sets whether or not to link to the camera's image quality setting when "Canon Log" is selected for "Picture Mode". On, Off When "Color Gamut/Gamma", "Color Temperature", and "Color Range" are all set to "On", the following settings are configured. Parameter of Cinema EOS System and DP-V2410 Cinema EOS System DP-V2410 Color Color Gamma Color Gamut Gamma Color Range Space Temperature BT.709 Canon ITU-R BT.709 Canon Log Automatic BT.2020...
  • Page 59 On, Off Color The image quality of the display corresponds to the range of the camera. Range On, Off Display Color Sets the color gamut shown on the display when the camera's "Color Space" is set to "Cinema Gamut Gamut" or "DCI-P3+". ITU-R BT.709, DCI-P3 Sets whether or not to stop the fan by linking with the camera's REC signal. Set "Fan Control" under "System Settings" to "On". On, Off Note • When set to "On", targets to be linked are REC signals that are compatible with this video display (SDI or HDMI signals of Cinema EOS System cameras and Canon professional-use video cameras). • At a room temperature (25 ˚C), the fan remains off for approximately one minute when the AC power supply is used and ten minutes when the DC power supply is used. Select the type of power supply according to the purposes. • If the temperature inside the main unit increases while the fan is off, the message "Fan will be rotated as the temperature is high." is displayed and the fan starts rotating approximately ten seconds later. Since the temperature of the main unit has increased, the fan rotates faster than usual. • The video display's fan may start rotating earlier than the camera because the temperature inside the main unit has increased. • The fan may not stop in some conditions, for example when used at a high temperature. Camera Sets conditions to display camera information. Information Automatic: Camera information is displayed for 4 seconds when the information has changed.

  • Page 60: System Settings

    System Settings This menu is used to configure settings related the system of the video display. Item Setting Options (underline indicates factory default) Network Configures settings for the network of the video display. Configure an IP Automatic: Configures an IP address automatically with DHCP/Automatic IP. Manual: Configure an IP address and subnet mask manually. Address Display 192.168.0.1 Subnet Mask 255.255.255.0 Language Sets the language of the OSD menu and messages. English, Function/Channel Button Sets the function or channel to assign to the F buttons or CH button. Display Sets the function to assign to the F buttons of the main unit. Select an F button and assign a Function/Display function from the following list. The factory defaults for the main unit F buttons is as follow: Function (CDL) Normal mode F1 : Contrast F2 : Brightness F3 : Time Code (On, Off) F4 : WFM/VEC (On, Off) F5 : Audio Level Meter (On, Off) F6 : Zoom (On, Off) F7 : Hide OSD (On, Off)
  • Page 61 Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI, DCI-P3 to 709, ITU-R BT.2020 to 709, ACESproxy, User LUT 1-8) Gamma (2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1-8) HDR Range CDL Preset...
  • Page 62 Compatible: Set this option when video is not played correctly in "Normal". "4K50.00P/60.00P" is not supported when this option is selected. Firmware Update This function is used to update the video display firmware. Refer to the Canon website for detailed information. OSD Menu...
  • Page 63 Item Setting Options (underline indicates factory default) Protect Settings Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System Information" appears, but other operations are grayed out because they are locked. Password Set a password to protect settings. Use a four-digit number (0000 to 9999). Protect Target Selects the target to be protected. Picture Mode: Select "On" to protect or "Off" to exclude settings for "Picture Mode". On, Off Select Channel: Select "On" to protect or "Off" to exclude settings for "Select Channel". On, Off Protect Select "OK" to protect. When a password has been set, enter the password and select "OK". • Unlocking Protect Settings Move the selection frame to "Protect Settings" and press the SET button for approximately 3 seconds. When a password has been set, enter the password and select "OK". Fan Settings Sets the operation of internal fan. Fan Control Makes the fan rotate faster before stopping in order to prevent the internal temperature from increasing, when the fan is stopped manually. On, Off Fan Stop The fan can be stopped manually when "Fan Control" is set to "On". The fan noise can be made silent when the video display is used during shooting or when silence is necessary. On, Off Note • If the message "Invalid operation due to high temperature." is displayed, the fan cannot be stopped even when "On" is selected for this item. Wait until the internal temperature lowers.
  • Page 64 Item Setting Options (underline indicates factory default) Export/Import Sets the export/import main menu settings. Note • The following settings cannot be exported or imported. This is also true when "All" is selected. - "Calibration" under "Adjustment" (including calibration results) - "Zoom" and "Frame Hold" under "Display Settings" - "Test Pattern" and "Monochrome/Blue Only/Red Off/Green Off/Blue Off" under "Function Settings”, "Frame Hold" under "Screen Capture" - "Date/Time", "Fan Stop", "Export/Import" and "Power on Setting" under "System Settings" • Data exported from this video display cannot be imported to other Canon video displays except DP-V2410. Export Target: Select the export destination. USB: Export to a USB memory User 1-3: Export to the built-in memory of the main unit Filename: Factory default is "dinfo_dpv2410.dat". You can change the name of the file to be exported to the USB memory within 16 one-byte characters including alphabetical characters, numbers, and symbols. Execute: Performs export. Import Target: Specify the destination to save the file to be imported. USB, User 1-3 Filename: Displays files with the extension ".dat" so you can select from among them. Settings (All, Adjustment, Channel Settings, Display Settings, Audio Settings, Marker Settings, Function Settings, System Settings): Select the settings to import.

  • Page 65: Signal Information

    Matrix ITU-R BT.709 Video Standard 3G-SDI RGB Range Full Sampling Structure 4:4:4:4 GBRA Bit Depth 10-bit Picture Rate 24.00 Scanning Method Progressive/Progressive (Transport/Picture) Link Number Single/Link_1 * When a content is grayed out, an asterisk "*" may be displayed indicating low "Picture Rate" accuracy such as "24.00P *". System Information Shows the video display status and network information. Item Display Example Display DP-V2410 Serial No. 000000000000 Firmware Ver. 1.0.0 Usage Time* IP Address 192.168.0.1 Subnet Mask 255.255.255.0 MAC Address FF:FF:FF:FF:FF:FF * The "Usage Time" is not always "0" when you purchase the display due to factory inspection. OSD Menu...

  • Page 66: Main Specifications/Performance

    Main specifications/Performance Panel Panel Type IPS LCD panel Screen Size 24 inch (61.1 cm) Aspect Ratio 17:9 Resolution 4096x2160 (8.8 megapixels) Active Display Area Approximately 540.7 x 285.1 mm Pixel Pitch 132 µm/193 ppi Panel Driver 1024 gradations, 10-bit for each RGB color Image quality Brightness (Standard) 100 cd/m View Angle (Up, Down, Left, Right) 89° (contrast ratio 10 : 1 or higher) Surface Treatment Anti-glare coating General Backlight Type RGB LED, direct down type Power Rated Voltage: 100 – 240 V AC Rated Frequency: 50/60 Hz 24 V – 28 V DC Max. 8.9 A, XLR terminal Power consumption At maximum load (including change in brightness through aging): Approximately 210 W At factory shipment: Approximately 160 W Environmental Operating Temperature and humidity: 0 – 40 °C (32 – 104 °F), 20 – 85 %RH (no condensation) Conditions recommended: 15 – 30 °C (59 – 86 °F) Pressure: 700 – 1060 hPa Storage/...

  • Page 67: Dimensions

    Dimensions ■ Main Unit • Front 594 (23.4) 567.6 (22.3) 100 (3.9) 4-M4 Depth: 7 (0.3) (MAX.) • Rear Panel center 10 (0.4) 106 (4.2) • Side 61 (2.4) 47.5 (1.9) 4-M4 Depth: 8 (0.3) (MAX.) 40 (1.6) 41 (1.6) 187 (7.4) 493 (19.4) 4- 4.5 (0.2)

  • Page 68: Appendix

    Appendix Supported Signal Format ■ SDI Formats with "*" support audio signals. Transmission method Signal format Color format Color depth Standards SD-SDI x 1 720x576i 50.00 Hz 4:2:2 YCbCr 10-bit SMPTE-259M HD-SDI x 1 1280x720P 59.94/60.00 Hz* 4:2:2 YCbCr 10-bit SMPTE 292-1 SMPTE 296 1280x720P 50.00 Hz* 1280x720P 29.97/30.00 Hz 1280x720P 25.00 Hz* 1280x720P 23.98/24.00 Hz* 1920x1080i 59.94/60.00 Hz* SMPTE 292-1 SMPTE 274M 1920x1080i 50.00 Hz* 1920x1080P 29.97/30.00 Hz* 1920x1080PsF 29.97/30.00 Hz* 1920x1080P 25.00 Hz* 1920x1080PsF 25.00 Hz* 1920x1080P 23.98/24.00 Hz* 1920x1080PsF 23.98/24.00 Hz* 2048x1080i 59.94/60.00 Hz 2048x1080i 50.00 Hz...
  • Page 69 Transmission method Signal format Color format Color depth Standards 3G-SDI Level A x 1 1920x1080i 59.94/60.00 Hz 4:4:4 RGB* 12-bit/10-bit SMPTE 425-1 4:4:4 YCbCr* SMPTE 274M 4:2:2 YCbCr 12-bit 1920x1080P 50.00 Hz* 4:2:2 YCbCr 10-bit 1920x1080i 50.00 Hz 4:4:4 RGB* 12-bit/10-bit 4:4:4 YCbCr* 4:2:2 YCbCr 12-bit 1920x1080P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 4:4:4 YCbCr SMPTE 274M 4:2:2 YCbCr 12-bit 1920x1080PsF 29.97/30.00 Hz 4:4:4 RGB* 10-bit 12-bit 4:4:4 YCbCr* 12-bit 4:4:4 YCbCr* 10-bit...
  • Page 70 Transmission method Signal format Color format Color depth Standards 3G-SDI Level A x 1 2048x1080i 50.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:4:4 X'Y'Z' 12-bit 4:2:2 YCbCr 2048x1080P 47.95/48.00 Hz 4:2:2 YCbCr 10-bit SMPTE 425-1 SMPTE 2048-2 2048x1080P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 428-9 SMPTE 428-19 4:4:4 X'Y'Z' 12-bit SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 2048-2 4:2:2 YCbCr 12-bit 2048x1080PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 428-9 4:4:4 X'Y'Z'...
  • Page 71 Transmission method Signal format Color format Color depth Standards 3G-SDI Level B x 1 1920x1080P 59.94/60.00 Hz 4:2:2 YCbCr 10-bit SMPTE 425-1 SMPTE 372 1920x1080i 59.94/60.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 274M 4:4:4 YCbCr 4:2:2 YCbCr* 12-bit 1920x1080P 50.00 Hz 4:2:2 YCbCr 10-bit 1920x1080i 50.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr* 12-bit 1920x1080P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit 1920x1080PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit...
  • Page 72 Transmission method Signal format Color format Color depth Standards 3G-SDI Level B x 1 2048x1080P 47.95/48.00 Hz 4:2:2 YCbCr 10-bit SMPTE 425-1 SMPTE 372 SMPTE 2048-2 2048x1080P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 372 SMPTE 428-9 4:4:4 X'Y'Z' 12-bit SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:2:2 YCbCr 12-bit SMPTE 2048-2 2048x1080PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:4:4 X'Y'Z' 12-bit SMPTE 428-9 SMPTE 428-19 SMPTE 2048-2...
  • Page 73 Transmission method Signal format Color format Color depth Standards 3G-SDI Level B x 1 2048x1080PsF 23.98/24.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:4:4 X'Y'Z' 12-bit SMPTE 428-9 SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:2:2 YCbCr 12-bit SMPTE 2048-2 HD-SDI x 4 3840x2160i 59.94/60.00 Hz* 4:2:2 YCbCr 10-bit SMPTE 292-1 SMPTE 274M 3840x2160i 50.00 Hz* 3840x2160P 29.97/30.00 Hz* 3840x2160PsF 29.97/30.00 Hz* 3840x2160P 25.00 Hz* 3840x2160PsF 25.00 Hz* 3840x2160P 23.98/24.00 Hz* 3840x2160PsF 23.98/24.00 Hz* 4096x2160i 59.94/60.00 Hz 4096x2160i 50.00 Hz 4096x2160P 29.97/30.00 Hz...
  • Page 74 Transmission method Signal format Color format Color depth Standards 3G-SDI Level A x 4 3840x2160PsF 29.97/30.00 Hz 4:4:4 RGB* 10-bit SMPTE 425-1 SMPTE 274M 12-bit 4:4:4 YCbCr* 12-bit 4:4:4 YCbCr* 10-bit SMPTE 425-1 SMPTE 274M 4:2:2 YCbCr 12-bit 3840x2160P 25.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit 3840x2160PsF 25.00 Hz 4:4:4 RGB* 10-bit 12-bit 4:4:4 YCbCr* 12-bit 4:4:4 YCbCr* 10-bit SMPTE 425-1 SMPTE 274M 4:2:2 YCbCr 12-bit 3840x2160P 23.98/24.00 Hz...
  • Page 75 Transmission method Signal format Color format Color depth Standards 3G-SDI Level A x 4 4096x2160P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 428-9 4:4:4 X'Y'Z' 12-bit SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 2048-2 4:2:2 YCbCr 12-bit 4096x2160PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 428-9 4:4:4 X'Y'Z' 12-bit SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 2048-2 4:2:2 YCbCr 12-bit 4096x2160P 25.00 Hz 4:4:4 RGB 12-bit/10-bit...
  • Page 76 Transmission method Signal format Color format Color depth Standards 3G-SDI Level B x 4 3840x2160i 50.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 4:4:4 YCbCr SMPTE 372 SMPTE 274M 4:2:2 YCbCr* 12-bit 3840x2160P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit 3840x2160PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit 3840x2160P 25.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit 3840x2160PsF 25.00 Hz 4:4:4 RGB 12-bit/10-bit 4:4:4 YCbCr 4:2:2 YCbCr 12-bit...
  • Page 77 Transmission method Signal format Color format Color depth Standards 3G-SDI Level B x 4 4096x2160P 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 372 SMPTE 428-9 4:4:4 X'Y'Z' 12-bit SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:2:2 YCbCr 12-bit SMPTE 2048-2 4096x2160PsF 29.97/30.00 Hz 4:4:4 RGB 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:4:4 X'Y'Z' 12-bit SMPTE 428-9 SMPTE 428-19 SMPTE 2048-2 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 372 4:2:2 YCbCr 12-bit...
  • Page 78 ■ RAW Signal format 3840x2160P 59.94 Hz, 50.00 Hz, 29.97 Hz, 25.00 Hz, 24.00 Hz, 23.98 Hz 4096x2160P 59.94 Hz, 50.00 Hz, 29.97 Hz, 25.00 Hz, 24.00 Hz, 23.98 Hz ■ HDMI Signal format Color format/Color depth 640x480P 59.94/60.00 Hz 4:4:4 RGB 8-bit 800x600P 60.00 Hz 1024x768P 60.00 Hz 720x480P 59.94/60.00 Hz 4:4:4 RGB 12-bit/10-bit/8-bit 4:4:4 YCbCr 12-bit/10-bit/8-bit 720x576P 50.00 Hz 4:2:2 YCbC 12-bit 1280x720P 59.94/60.00 Hz 1280x720P 50.00 Hz 1920x1080P 59.94/60.00 Hz 1920x1080i 59.94/60.00 Hz 1920x1080P 50.00 Hz 1920x1080i 50.00 Hz 1920x1080P 29.97/30.00 Hz 1920x1080P 25.00 Hz 1920x1080P 23.98/24.00 Hz 2048x1080P 59.94/60.00 Hz 2048x1080P 50.00 Hz 2048x1080P 29.97/30.00 Hz 2048x1080P 25.00 Hz 2048x1080P 23.98/24.00 Hz 3840x2160P 59.94/60.00 Hz 4:4:4 RGB 8-bit 4:4:4 YCbCr 8-bit 3840x2160P 50.00 Hz 4:2:2 YCbC 12-bit 4:2:0 YCbC 12-bit/10-bit/8-bit 3840x2160P 29.97/30.00 Hz...

  • Page 79: Image/Frame Display

    Image/Frame Display ■ SDI Signal system Display Method 720x576 50.00 50.00 1280x720 23.98/24.00 47.96/48.00 25.00 50.00 29.97/30.00 59.94/60.00 50.00 50.00 59.94/60.00 59.94/60.00 1920x1080 50.00 50.00 59.94/60.00 59.94/60.00 23.98/24.00 47.96/48.00 25.00 50.00 29.97/30.00 59.94/60.00 23.98/24.00 47.96/48.00 25.00 50.00 29.97/30.00 59.94/60.00 50.00 50.00 59.94/60.00 59.94/60.00...
  • Page 80 Signal system Display Method 4096x2160 50.00 50.00 59.94/60.00 59.94/60.00 23.98/24.00 47.96/48.00 25.00 50.00 29.97/30.00 59.94/60.00 23.98/24.00 47.96/48.00 25.00 50.00 29.97/30.00 59.94/60.00 47.95/48.00 47.95/48.00 50.00 50.00 59.94/60.00 59.94/60.00 * : Displaying same frame Appendix...
  • Page 81 ■ HDMI Signal system Display Method 640x480 59.94/60.00 59.94/60.00 800x600 60.00 60.00 720x480P 59.94/60.00 59.94/60.00 720x576 50.00 50.00 1024x768 60.00 60.00 1280x720 59.94/60.00 59.94/60.00 1280x720 50.00 50.00 1920x1080 59.94/60.00 59.94/60.00 1920x1080 59.94/60.00 59.94/60.00 1920x1080 50.00 50.00 1920x1080 50.00 50.00 1920x1080 59.94/60.00 59.94/60.00 1920x1080...

  • Page 82: Input Signals And Adjustable/Setting Item

    ●* ●* ●* Display Settings Zoom ●* ● ● — ● ● Film Cadence ●* Function Settings Time Code ●* ● ● Screen Capture ●* ● ● Camera Link ●* ●* ● -: Setting is disabled. : SD-SDI is fixed to "Non-constant Luminance". : Cannot be set to "Dual Input". : Fixed to "Automatic". : SD-SDI is fixed to "4:2:2 YCbCr 10-bit". : Fixed to "Automatic". : Only "Automatic" or "4:4:4 XYZ 10/12-bit" can be selected. : Only "Center" or "Off" can be selected. : Can be set only when "I/P Conversion" is set to "Image Priority". : Can be displayed only on Canon cameras that support HDMI time code output. : Cannot be executed when verified by HDCP. : Can be set only when "Canon Log" is set for "Picture Mode". : Can be set only for "Fan". Appendix...

  • Page 83: Error Messages

    Error Messages Message Description and Action Calibration Failed to initialize the external sensor. See CA-310 and CA-210 instruction manual. Calibration error. • Check the installation and connection of the external sensor and retry ( 22). • Perform matrix calibration of CA-310 and CA-210 22). Calibration is completed. Set the "Luminance" in calibration again ( 40). (Brightness setting is lower than target brightness.) Failed to detect the external sensor. Correctly connect the external sensor to the USB Please check the connection with the sensor. port of this main unit. Network Communication error. IP address may be in conflict or there may be a network communication error. Check the network environment. Invalid IP Address. Enter the correct IP address. Invalid Subnet Mask. Enter the correct subnet mask. Various settings, The USB memory is full. Use another USB memory or delete the content of CDL export the memory. Failed to write file. The USB memory may be defective or protected.
  • Page 84 Message Description and Action Hardware error Backlight error. Disconnect the power cord, reconnect it, and then turn on the power. Fan error. If the message persists, contact Canon Customer Panel error. Center. I/F error. System error. Invalid operation due to high temperature. The temperature inside the main unit is high. Turn off the power and wait until the fan stops. Input signal No Signal Displayed when there is no video signal input. Unsupported Unsupported video signal is input. Check the supported signal format ( 68). "Input Configuration" is different from Payload. Check the "Input Configuration" ( 43) and "Signal Information" ( 65) settings. Reset any incorrect "Input Configuration" settings. Operation Invalid operation. Operation is disabled. Check the setting items. "Protect Settings" is on. To use the OSD menu, move the selection frame to "Protect Settings" and press the jog dial for approximately 3 seconds. "CDL Bypass" is on. When "CDL Bypass" is turned "On", you cannot adjust "Power", "Saturation", "Offset", or "Slope".

  • Page 85: Troubleshooting

    (Power indicator does not turn on.) • Check that the AC power supply or DC power cord is connected correctly. • Brightness of the power indicator may be turned off. Turn it on and check once more. The screen is dark. When the power indicator does not turn on: • Press the button. • Check that the AC power supply or DC power cord is connected correctly. When the power indicator is lit orange: • Press the button. When the power indicator is flashing orange: • Flashing once every 3 seconds : Contact Canon Customer Center. • Flashing twice every 3 seconds : - Turn on the power with the button. - The temperature of the display rises (or falls) depend on operation environment. Check the environmental conditions ( 66) and do not use in direct sunlight. - If the power still does not turn on, contact Canon Customer Center. The power suddenly goes off when a DC • Some DC power supply units turn off the voltage when a threshold power supply is used. value is reached. In this case, the message indicating low voltage is not —...
  • Page 86 Symptom Cause and Action OSD menu cannot be used. • Check that "Protect Settings" is not set. "Aspect Marker", " Safety Zone Marker " or • A channel with no signal, unsupported signal, or with "Input "Area Marker" does not appear. Configuration" not set may be selected. Check the signal. The fan starts to rotate even when "Fan" • The fan stays off for approx. 1 minute when an AC power supply is used. under "Camera Link" is set to "On" or To keep the fan off for a longer period, use a DC power supply. "Fan Stop" is set to "On". • When "Fan" under "Camera Link" is set to "On", the down time may not match the camera. The fan does not stop even when "Fan" • The fan does not stop if the internal temperature of the video display is under "Camera Link" is set to "On" or high. Configure settings after the internal temperature has lowered.

  • Page 87: Software Used In This Product

    Software Used in This Product Software installed with this product includes software modules from Canon or third parties. Software Developed by Canon and Free Software Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws. This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license. Acquiring Source Code for Free Software Some free software requires the acquirement of the source code of modules in order to distribute the executable form of those software modules. For information on how to acquire the source code for free software such as these and confirming terms of the GPL, LGPL and other license agreements, please check with the distributor from whom the product was purchased. The following free software modules are installed to this product: • linux kernel • busybox • glibc • JFFS2 • SquashFS • FUSE • libfuse • libupnp • avahi-autoipd • libxml • zlib • libpng...
  • Page 88 ■libxml License Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him. Software Used in This Product...

  • Page 89: Index

    Firmware Ver. ............. 65 Calibration ............22, 40 Format ............... 43 Camera Information ........... 59 Frame Hold ............... 46 Camera Link .............. 58 Function/Channel Button ........... 60 Canon Log, CanonLog 2 ........34, 36 Function Guide ............58 CDL Bypass .............. 39 Function Settings ............54 CDL Export/CDL Import ........24, 39 Center Marker ............53 Channel Name ............. 25, 44 Gain R/G/B ..............35 Channel Settings ............
  • Page 90 Gray (20%) (Test Pattern) ........... 57 Green Off ..............58 Password ..............63 Green (Test Pattern) ........... 57 Peaking ..............54 Grid Marker ............... 53 Picture Mode ............. 34 PLUGE (Test Pattern) ..........57 Power ................ 39 HDMI ..............10, 16 Power Indicator Brightness ........62 HDR Range ............... 37 Power on Setting ............64 HD-SDI .
  • Page 91 Test Pattern ............... 57 Time Code ..............55 Usage Time ............... 65 USB ..............9, 22, 23 User 1-7 ..............34 User LUT ............. 35, 36 Various Function (Function Settings) ......58 Vector Scope ............. 56 VITC ................55 Wave Form Monitor ........... 55 White (Test Pattern) ........... 57 Zoom ................ 45 Index...
  • Page 92 Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
  • Page 93 DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE.
  • Page 94 Canon Canada, including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
  • Page 95 THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE ALLEGED DAMAGE.
  • Page 96 CANON MEXICANA, S DE RL DE CV http://www.canon.com.mx Canon Korea Consumer Imaging Inc. 52 (55) 5249-4900 http://www.canon-ci.co.kr 5F, Canon Bldg, 607, Teheran-ro, Gangnam-gu, Seoul, Korea +82(0)2-1588-8133 Visit your local Canon Web site to download the latest version of this instruction manual. MIE-0010-000 © CANON INC. 2015...

Table of Contents