Connecting And Setting Network - Samsung SDH-C74040 User Manual
Hide thumbs
Also See for SDH-C74040:
- User manual (146 pages) ,
- Quick start manual (12 pages) ,
- Quick network setup manual (19 pages)
Table of Contents
Advertisement
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection mode.
When no router is used
• Static mode
- Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR
and remote user.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <Static>.
Consult your network manager for IP Address, Gateway and
Subnet Mask.
• DHCP mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP PPPoE modem or FTTH network.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <DHCP>.
• PPPoE mode
- Internet connection : An PPPoE modem is directly connected to the DVR, where the PPPoE connection
requires user ID and password.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <PPPoE>.
<ID> and <Password> should be the same to the PPPoE user
information.
If you don't know the ID and password, consult your PPPoE service
provider.
Connection Mode
Interface
Port
IP Type
Static
Transfer Bandwidth
2Mbps
IP Address
192.168.1.200
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
DNS
Manual
168.126.63.1
OK
Cancel
Connection Mode
Interface
Port
IP Type
PPPoE
Transfer Bandwidth
600kbps
IP Address
192.168.1.200
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
DNS
Manual
168.126.63.1
ID
ID
Password
************
OK
Cancel
English _65
- Quick Links:
- User Manual
- Connecting the Network
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
