Brother DCP-T300 Basic User's Manual page 69
Hide thumbs
Also See for DCP-T300:
- Quick start manual ,
- Advanced user's manual (46 pages) ,
- Service manual (309 pages)
Table of Contents
Advertisement
Copying Difficulties
Difficulty
Vertical black lines or streaks
appear in copies. (DCP-T700W)
Black marks or spots appear in
copies.
Copies are blank.
Poor copy results when using the
ADF. (DCP-T700W)
Fit to Page does not work correctly. Make sure the document is not skewed on the scanner glass.
Scanning Difficulties
Difficulty
TWAIN or WIA errors appear when
starting to scan. (Windows
TWAIN or ICA errors appear when
starting to scan. (Macintosh)
Poor scanning results when using
the ADF. (DCP-T700W)
Vertical black lines appear in
the scanned data.
Software Difficulties
Difficulty
Cannot install software or print.
"Device Busy"
Suggestions
Black vertical lines on copies are typically caused by dirt or correction fluid on the
glass strip. Clean the glass strip, scanner glass, white bar and white plastic above
them. (See Cleaning the scanner glass on page 36.)
Black marks or spots on copies are typically caused by dirt or correction fluid on
the scanner glass. Clean the scanner glass and white plastic above it. (See
Cleaning the scanner glass on page 36.)
Make sure you are loading the document correctly. (See Loading documents
on page 20.)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Reposition the document and try again.
Suggestions
Make sure the Brother TWAIN or WIA driver is chosen as the primary source in
®
your scanning application.
)
Make sure the Brother TWAIN driver is chosen as the primary source.
You can also scan documents using the ICA Scanner Driver.
(See Software and Network User's Guide.)
Clean the white bar in the ADF and the glass strip underneath it.
(See Cleaning the scanner glass on page 36.)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Suggestions
®
(Windows
)
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
Troubleshooting
61
B
Hide quick links:
Advertisement
Table of Contents
