Table of Contents
Advertisement
6.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
H110M-PLUS D3 Front panel audio connector
•
•
7.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
H110M-PLUS D3 Digital audio connector
The S/PDIF module is purchased separately.
1-18
AAFP
H110M-PLUS D3
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD].
H110M-PLUS D3
PIN 1
PIN 1
HD-audio-compliant
Legacy AC'97
pin definition
compliant definition
SPDIF_OUT
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
