Network Setup - Yamaha R-N500 Owner's Manual
Hide thumbs
Also See for R-N500:
- Owner's manual (20 pages) ,
- Service manual (100 pages) ,
- Firmware update (4 pages)
Table of Contents
Advertisement
Available languages
Available languages
Configuring various functions (SETUP menu)
Network Setup
Configures the network settings.
■ Information
Displays the network information on the unit.
Appears if an update for this unit's firmware is
NewFwAvailable
available (p.39).
The connection status of the NETWORK jack
STATUS
MAC address
MAC
IP address
IP
Subnet mask
SUBNET
The IP address of the default gateway
GTWY
The IP address of the primary DNS server
DNS P
The IP address of the secondary DNS server
DNS S
The ID of the Internet radio (vTuner)
VTUNER
■ IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Does not use a DHCP server. Configure the
network parameters manually. For details, see
Off
"Manual network settings".
Uses a DHCP server to automatically obtain the
On (default)
unit's network parameters (such as IP address).
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (B / C) to select a
parameter type.
Specifies an IP address.
Address
Subnet
Specifies a subnet mask.
Mask
Default
Specifies the IP address of the default gateway.
Gateway
Specifies the IP address of the primary DNS
DNS
server.
Server(P)
Specifies the IP address of the secondary DNS
DNS
server.
Server(S)
3
Use the cursor keys (D / E) to select the edit
position.
Address1
(Example: IP address setting)
Use the cursor keys (D / E) to switch between
segments (Address1, Address2...) of the address.
32
En
4
5
■ MAC Filter
Sets the MAC address filter to limit access to the unit from
other network devices.
Filter
Enables/disables the MAC address filter.
Off (default)
On
MAC address filter settings
1
2
3
4
y
When using "AirPlay" (p.28) and "DMC Control" (p.32), you
cannot limit access from network devices regardless of the MAC
address filter.
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
Disable
Enable
(default)
y
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
■ NET Standby
Selects whether the unit can be turned on from other
network devices (network standby).
VOL.
SP A
192
Off (default)
On
Use the Cursor keys (B / C) or numeric keys
to change a value.
To exit from the menu, press SETUP.
Disables the MAC address filter.
Enables the MAC address filter. In "MAC
Address 01–10", specify the MAC addresses of
the network devices that will be permitted access
to the unit.
Set "Filter" to "On".
Use the cursor keys (B / C) to select an MAC
address number (01 to 10).
Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a value.
To exit from the menu, press SETUP.
Does not allow DMCs to control playback.
Allows DMCs to control playback.
Disables the network standby function.
Enables the network standby function. (The unit
consumes more power than when "Off" is
selected.)
- Quick Links:
- Connecting to a Network
- Network Setup
Hide quick links:
Advertisement
Chapters
Table of Contents
