Table of Contents
Advertisement
84
Technical specifications
This product uses frequency bands
Operating temperature:
whose use is harmonized within
-10˚ – +55˚ celcius
the European Community area. This
Standby time:
product is intended to be connect-
Up to 260 hours
ed to the GSM public telecommu-
nications network.
Talk time:
• GSM900 Class 4 (2 Watts)
Up to 360 minutes
Frequency range
880-960 MHz
Battery warnings:
• Never charge your battery when
• GSM1800 Class 1 (1 Watt)
the ambient temperature is greater
Frequency range
than 104 degrees fahrenheit (40
1710-1880 Mhz
degrees Celsius).
• GSM1900 Class 1 (1 Watt)
• To prevent injury or burns, NEVER
Frequency range
allow metal objects to contact or
1850-1990 Mhz
short circuit the battery terminals.
Weight:
• Never dispose of your battery
97 g
where it will be exposed to fire.
Size:
• Always dispose of your battery in
112 x 44 x 22 mm
accordance with local laws and reg-
ulations.
Operating voltage:
3.7 V
• Temperature extremes will af-fect
the charging characteristics of your
Power consumption:
battery. Allow it to cool or warm to
Max. 650 mAh
a reasonable temperature before
charging.
Further information
Declaration of Conformity
• The capacity and lifetime of your
We,
battery will be reduced by leaving it
Siemens Mobile Phones A/S
in hot or cold places, such as in a
Industrivej 30
closed car in summer or winter
DK-9490 Pandrup
conditions.
Denmark
declare under sole responsibility that the products:
Licenses:
Siemens S40
T9 Text Input® is a registered
Siemens S42
trademark of Tegic Communi-
cations.
manufactured by
T9 is licensed under one or more
Flextronics International Danmark A/S
of the following U.S. Patents:
Industrivej 30
5,818,437, 5,953,541, 5,187,480,
DK-9490 Pandrup
5,945,928, 6,011,554 and additional
Denmark
patents are pending worldwide.
to which this declaration relates, are in conformity with the
following standards and/or other normative documents:
Your WAP browser is licensed
• EN 301 419-1
from:
• EN 301 419-2
• Draft EN 301 511
• EN 60 950
• ETS 300 342-1
• ES 59 005 (following the provisions of EC Council
Any attempt to modify, translate,
We hereby declare that tests have been conducted, test
reverse-engineer, de-compile or
results evaluated and that the above named products are in
disassemble any part of the
conformity with the essential requirements of Directive
Phone.Com Software is prohibited.
1999/5/EEC.
Further information
Recommendation 1999/519/EEC)
The conformity assessment procedure referred to in Article
10(5) and detailed in Annex V of Directive 1999/5/EEC has
been followed with the involvement of the Notified Body:
BABT
Claremont House
34 Molesey Road
Walton-on-Thames
KT 12 4RQ
United Kingdom
Identification mark: 0168
The technical documentation relevant to the above
equipment will be held at
Siemens Mobile Phones A/S
Industrivej 30
DK-9490 Pandrup
Denmark
Pandrup, October 16, 2000
Oluf Kristensen
Manfred Heier
Regulatory Affairs
Managing Director
85
Advertisement
Table of Contents
